참고문헌
- 월간PRESS 기술, v.3 no.1 알루미늄계 재료의 국부 가열 디프 드로잉 管又信;金子純一
- 한국정밀공학회지 v.13 no.5 금형의 국부적인 가열에 의한 사각통의 온간 디프 드로잉 성형성에 미치는 온도의 효과 김창수;박동환;강성수
- IDDRG Proceedings Cooled-Punch Deep Drawing and its Application to Automobile Parts T.Ohwue;M.Usuda;S.Sudo
- 한국소성가공학회지 v.4 no.4 크랭크 프레스와 유압 프레스에서 스테인리스 강판의 온간 드로잉성 비교 김종호;최치수;나경환
- 대한기계학회논문집 v.14 no.5 비등은 박판 성형공정의 유한요소 해석 김용환;R.H.Wagoner
- JSTP v.34 no.390 Finite Element Simulation of Warm Deep Drawing of Type 304 Stainless Steel Sheet with Deformation-Induced Transformation K.Shinagawa;T.Takeoka;K.Mori;K.Osakada
- 한양대학교 산업과학 논문집 v.44 유한요소법에 의한 온간 박판 성형 금형의 트라이아웃기술 개발 김성민;금영탁
- Scr. Metall. v.20 Effect of Temperature, Strain, and Strain Rate on the Tensile Flow Stress of I.F. Steel and Stainless Steel Type 310 M.R.Lin;R.H.Wagoner
- Numerical Simulation of the Superplastic Forming of thin Sheet Components Using the Finite Element Method v.30 J.Bonet;R.D.Wood;A.H.S.Wargadipura
- 대한기계학회논문집 v.13 no.4 박판 인장 시험에서 가공열의 영향에 관한 유한요소해석 김용환;R.H.Wagoner
- The Mathematical Theory of Plasticity R.Hill
- Int. J. Mech. Sci. v.20 A Finite Element Analysis of the Rigid-plastic Deformation of the Flange in a Deep Drawing Process Based on a Fourth-degree Yield Function-Ⅱ M.Gotoh
- J. Mech. Phys. Solids v.38 no.3 Constitutive Modelling of Orthotropic Plasticity in Sheet Metals R.Hill
- Int. J. Plasticity v.9 Plastic Dual Potential for FCC Metals and Application to Minimum Plastic Work Calculations F.Barlat;K.Chung;O.Richmond
- Int. J. Mech. Sci. v.39 no.10 Three-dimensional Finite Element Method Simulations of Stamping Processes of Planar Anisotropic Sheet Metals S.Y.Lee;Y>T.Keum;J.M.Park;K.Chung;F.Barlat
- Scr. Metall. v.21 The Role of Deformation Heating in Tensile Testing of Aluminum-Killed Steel Y.H.Kim;R.H.Wagoner
- Int. J. Mech. Sci. v.29 no.3 An Analytical Investigation of Deformation-Induced Heating in Tensile Testing Y.H.Kim;R.H.Wagoner
- Qurt. J. Mech. Appl. Math. v.9 An Approximate Method for Determining the Temperature Reached in Steady Motion Problems of Plane Plastic Strain J.F.P.Bishop
- '98 한국소성가공회 춘계학술대회논문집 알루미늄 합금박판 비등은 성형공정의 유한 요소해석 및 실험적 연구(제1부:실험) 류호연;배원택;김종호;김성민;구본영;금영탁
- Metall. Trans. A v.18A A Simplified Model of Heat Generation Effects During the Uniaxial Tensile Test Y.Gao;R.H.Wagoner
- '98 한국소성가공회 춘계학술대회논문집 알루미늄 합금박판 비등은 성형공정의 유한 요소해석 및 실험적 연구(제2부:해석) 구본영;김성민;금영탁;류호연;김종호
- 한국소성가공학회지 v.6 no.4 알루미늄 합금 박판 스탬핑 공정의 단면 성형 해석 이광병;이승열;금영탁
- Introduction to Heat Transfer(2nd ed.) F.P.Incropera;D.P.D.Witt
- AL1050 및 AL5052 검사성적서 박종신