Abstract
Dang-Chin feldspar powder with the mean particle size of 9.1 $\mu\textrm{m}$ was added to the synthesized mullite powder with the particle size of +325∼-200 mesh and the powder compact was prepared by PLPP(pressureless powder packing method). Densification behaviors were observed in sintering temperature range of 1200∼1400$^{\circ}C$. The binder solution of 4% PVA was infilterated into packed powder to the suitable strength. The PLPP method makes it possible to form compacts without clay as plasticizer. Therfore there was no defect caused by phase transition after sintering. Additionally, we observed the dense microstructure by the melting of feldspar. When the mullite compacts with feldspar of 30% were sintered at 1300$^{\circ}C$-4 hrs, we obtained the dense microstructure with zero water absorption and porosity <1%. When these compacts were sintered longer than 4 hrs at 1300$^{\circ}C$ or higher than 1400$^{\circ}C$, the examggerated grain growth of mullite was observed.
+325~-200 mesh의 합성 뮬라이트에 평균입경 9.1$\mu\textrm{m}$의 장석을 첨가하여 무가압분물충전성형법으로 성형한후 1200~140$0^{\circ}C$에서의 치밀화 거동을 관찰하였다. 적절한 성형강도를 얻기 위해 충전된 분말내로 PVA 4% 결합제 용액을 침투시켰다. 가소성을 얻기 위한 점토없이 성형이 가능한 무가압분말충전성형법에 의해 제조된 성형체를 열처리하는 경우, 기존의 방법처럼 점토의 상전이로 인한 결함발생이 없었으며 장석의 용융에 의해 치밀한 미세구조를 얻을 수 있었다. 장석 첨가량이 30%인 시편의 경우 130$0^{\circ}C$에서 4시간 동안 소결했을 때 흡수율 0, 기공율 1% 미만의 치밀한 미세조직을 얻을 수 있었다. 그러나 그 이상의 유지시간이나, 140$0^{\circ}C$ 이상의 소결온도에서는 뮬라이트의 거대 입성장이 일어났다.