TiO$_2$ 첨가에 의한 불투명한 실리카 에어로겔의 합성 및 특성화

Preparation and Characterization of Opacified Silica Aerogels Doped by TiO$_2$

  • 손봉희 (연세대학교 세라믹공학과) ;
  • 현상훈 (연세대학교 세라믹공학과)
  • 발행 : 1999.02.01

초록

티타니아가 첨가된 불투명한 실리카 에어로겔의 물성 및 열처리에 따른 미세구조 변화가 연구되었다. 부분가수 분해된 TEOS-이소프로판을 용액에 titanium isopropoxide를 첨가한후 겔화시킨 습윤겔을 초임계건조(25$0^{\circ}C$, 1250 psig)하여 모노리스 타입 에어로겔을 합성하였으며, SiO2-10 mol% TiO2 에어로겔의 밀도와 기공율은 각각 0.23 g/㎤와 90% 이었다. 초임계건조시 티타늄의 함량이 증가함에 따라 수축율이 증가할 뿐만 아니라 티타니아는 anatase 상으로 상전이됨과 동시에 입자 응집에 의해 100~800nm 크기의 cluster로 에어로겔 내에 균일하게 분포되었다. 불투명한 에어로겔은 8$mu extrm{m}$ 이하의 적외 영역에서 순수 실리카 에어로겔에 비하여 매우 낮은 광투과율과 $600^{\circ}C$까지 높은 미세구조 안정성을 보여주었다.

The physical properties and microstructural changes with heat-treatment of opacified silica aerogels doped by TiO2 were investigated. Monolithic SiO2-TiO2 aerogels were prepared by supercritical drying (25$0^{\circ}C$, 1250 psig) of wet gel obtained by adding titanium isopropoxide to prehydrolyzed TEOS-isopropanol solutions. The density and the porosity of SiO2-10 mol% TiO2 aerogels were 0.23 g/㎤ and 90%, respectively. During supercritical drying, the linear shrinkage of aerogels increased with increase in the titanium content an TiO2 was transformed to the anatase phase as well as particls agglomerates led to TiO2 clusters of 100~800 nm dispersed homogeneoulsy in the silica matrix. The IR transmittance of opacified silica aerogels was very low in the region of wavelengths below 8 ${\mu}{\textrm}{m}$ compared with pure silica aerogels and SiO2-TiO2 aerogels showed the high thermal stability of microstructures up to $600^{\circ}C$.

키워드

참고문헌

  1. Chem. Rew. v.89 no.765 Aerogels and Related Porous Materials H. D. Gesser;P. C. Goswami
  2. J. Am. Ceram. Soc. v.75 no.8 Aerogels J. Fricke;A. Emmerling
  3. Catalysis Today v.35 no.319 Catalytic Aerogels G. M. Pajonk
  4. J. Korean Ceram. Soc. v.34 no.3 Ultralow Dielectric Properties of SiO₂ Aerogel Thin Films S. H. Hyun;J. J. Kim;D. J. Kim;M. H. Jo;H. H. Park
  5. Aerogels, Proceedings of the 1st International Symposium Aerogel as a Transparent Thermal Insulation Material for Buildings E. Schneiber;E. Boy;K. Bertsch
  6. J. Non-Cryst. Solids v.145 no.241 Solar Collector with Monolith Silica Aerogels Svend Svendsen
  7. J. Non-Cryst. Solids v.145 no.211 Heat Transfer in Opacified Aerogel Powders E. Hmmer;X. Lu;Th. Rettelbach;J. Fricke
  8. J. Korean Ceram. Soc. v.34 no.9 Mechanical Strength and Thermal Conductivity of Pure/Opacified Silica Aerogels S. H. Hyun;C. H. Lee;D. J. Kim;D. J. Seung
  9. J. Non-Cryst. Solids v.186 no.285 Thermal Characterization of Carbon-Opacified Silica Acrogels Daehee Lee;Peter C. Stevens;Shou Quan Zeng;Arlon J. Hunt
  10. J. Non-Cryst. Solids v.186 no.291 Intergration of Mineral Powders into SiO₂ Aerogels J. Kuhn;T. Gleissner;M. C. Arduini-Schuster;S. Korder;J. Fricke
  11. J. Non-Cryst. Solids v.186 no.296 Monolithic Silica Aerogel Insulation Doped with TiO₂ Powder and Ceramic Fibers J. Wang;J. Kuhn;X. Lu
  12. J. Catalysis v.153 no.165 TitaniaSilica Mixed Oxides;1. Influence of Sol-Gel and Drying Conditions of Structural Properties D. C. M. Dutoit;M. Schneider;A. Baiker
  13. J. Colloid Interface Sci. v.188 no.493 Preparation and Characterization of Silica-Titania and Silica-Alumina Aerogels H. Tamon;T. Sone;M Mikami;M. Okazaki
  14. J. Catalysis v.150 no.311 Effect of Prehydrolysis on the Textural and Catalytic Properties of Titania-Silica Aerogels J. B. Miller;S. T. Johnston;E. I. Ko
  15. J. Korean Ceram. Soc. v.33 no.5 Low Pressure Synthesis of Silica Aerogels by Supercritical Drying D. J. Kim;S. H. Hyun
  16. J. Non-Cryst. Solids v.145 no.175 Structural Investigation of the Silica-Titania Gel/Glass Transition M. Beghi;P. Chiurlo;L. Costa;M. Palladino;M. F. Pirini
  17. J. Non-Cryst. Solids v.38;39 no.81 Formation of Titania-Silica Glasses by Low Temperature Chemical Polymerization Bulent E. Yoldas