Buckling Behavior of Elastically Restrained Orthotropic Plates

탄성구속된 직교이방성판의 좌굴거동

  • 윤순종 (홍익대학교 토목공학과) ;
  • 정상균 (홍익대학교 토목공학과 대학원)
  • Published : 1999.06.01

Abstract

In this paper, we present the analytical study results of buckling behavior of elastically restrained orthotropic plates. In the study the boundary conditions of the plate are simply supported at all four edges and elastically restrained by the elastic medium at opposite two longitudinal edges. The energy method is employed in the solution of the problems in which method the buckling coefficient is calculated from the condition that the work-done by the external forces during buckling is equal to the stored elastic strain energy. The results are presented in the graphical from. The equations derived for the orthotropic plate in this study are compared with existing isotropic ones and identical results were observed.

본 연구는 탄성구속된 직교이방성판의 탄성좌굴거동에 대한 해석적인 연구결과이다. 이 연구에서 판의 하중이 재하되는 변은 단순지지되어있고 하중이 재하되지 않는 변은 탄성구속되어있다. 등분포 일축 압축력과 면내 전단력이 작용하는 경우에 대한 좌굴해석식을 에너지법을 사용하여 각각 유도하였으며 그 결과를 그래프로 나타내었다. 유도된 식의 검증을 위하여 등방성재료의 역학적성질을 좌굴해석식에 대입한 결과 기존의 발표된 등방성재료의 결과와 동일한 결과를 얻을 수 있었다.

Keywords

References

  1. Theory of elastic stability (2nd ed.) Timoshenko, S. P.;Gere, J. M.
  2. Der Bauin-genieur v.17 Biegungsbeulung der rechteck-platte mit eingepannten langsranedn Nolke, K.
  3. NACA Technical Note 1323 Chart for the minimum-weight design of multiweb wings in bending Schette, E. H.;McCulloch, J. C.
  4. Journal Aero. Sci. v.20 no.8 Critical bending stress for flat rectangular plates supported along all edges and elastically restrained against rotation along the unloaded compression edges Johnson, J. H.;Noel, R. G.
  5. Gordon and Breach, (2nd printing) Lekhnitskii, S. G. Anisotropic plates;Tsai, S. W.;Cheron, T. (Trans.)
  6. The stability of flat plates Bulson, P. S.
  7. NACA Technical Report No. 733 Critical compressive stress for flat rectangular plates supported along all edges and elastically restrained against rotation along the unloaded edges Lundquist, E.;Stowell, E. Z.
  8. Extern fiberglass structural shapes design manual MMFG
  9. Buckling strength of metal structures Bleich, F.
  10. Proceedings of the Korean Society for Composite Materials Conference v.1 Shear buckling of long orthotropic thin plate with two elastically restrained edges Jung, J. H.;Jeong, S. K.;Chae, S. H.;Yoon, S. J.
  11. Journal of the Korean Society for Composite Materials v.11 no.6 Stability of simply supported orthotropic rectangular plates under in-plane shear and bending force Yoon, S. J.;Park, B. H.;Jeong, S. K.
  12. NACA Technical Note No. 1222 Buckling stresses of simply supported rectangular flat plates in shear Stein, M.;Neff, J.
  13. Ingenieur-Archiv v.8 Biegungsbeulung der rechteck-platte mit eingepannten langsranedn Nolke, K.