Composites Research

  • 제12권5호
  • /
  • Pages.40-53
  • /
  • 1999
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지

고속하중을 받는 다방향복합적층판의 층간파괴에너지에 미치는 굽힘탄성계수와 섬유가교의 효과

Effects of Flexural Modulus and Fiber Bridging on the Interlaminar Fracture Energy of Multidirectional Composite Laminates under High Rate Loading

  • 최낙삼 (한양대학교 공학대학 기계공학과) ;
  • ;
  • A.J.Kinloch (Mechanical Engineering, Imperial College of Science, Technology and Medicine, U.K.)
  • 발행 : 1999.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

저속시험 및 약 11.4m/s까지의 고속시험을 받는 다방향 탄소섬유/에폭시 복합적층판의 층간파괴거동에 대해 양외팔보(DCB)시험편을 이용하여 연구했다. 모드I의 하중을 1.0m/s이상으로 가한 결과 하중-시간곡선에 동적효과가 발생하여, 시험속도에 비례하는 단순관게식으로 예상되는 것보다 더 큰 균열속도가 나타났다. 시험편 개구변위와 균열길이만을 사용하는 수정된 선형보해석식은 동적인 층간파괴에너지$G_{IC}$를 평가하기 위해 유효했다. 또한 굽힘탕선계수의 실측값은 시험속도의 증가에 다라 증가했는데, 이를 $G_{IC}$의 평가시에 고려했다. 시험속도가 1.0m/s까지 증가할 때, 균열개시 및 정지시의 $G_{IC}$값은 변화가 없었으나, 11.4m/s의 속도에서 최대 GIC값은 섬유가교효과의 증대로 크게 증가했다. 또한 초기균열길이가 길수록 고속시의 최대GIC값은 저하했다.

The interlaminar facture behavior of multidirectional carbon-fiber/epoxy composite laminates under low and high rates of test, up to rate of about 11.4m/s has been investigated using the double cantilever beam specimens. The mode I loasing with rates above 1.0m/s had considerable dynamic effects on the load-time curves and thus revealed higher values of the average crack velocity than thet expected from a simple proportional relationship with the test rate. The modified beam analysis utilizing only the opening displacement and crack length exhibited an effective means for evaluating the dynamic fracture energy $G_{IC}$. Flexural modulus increased gradually with an increase of the test rate, which was utilized in the evaluation of $G_{IC}$. Values of $G_{IC}$ at the crack initiation and arrest were scarcely changed with increasing test rate up to 1.0m/s. However the maximum $G_{IC}$ was much enlarged at 11.4m/s due to the large amount of fiber bridging the crack tip. The larger the initial crack length, the smaller the maximum $G_{IC}$ at high rate.

키워드

참고문헌

  1. Composites Science and Technology v.35 Effects of fiber bridging on GIC of a unidirectional glass/epoxy composites Huang,X.N.;Hull,D.
  2. Application of Fracture Mechanics to Composite Materials;Composite Materials Series v.6 Imterlaminar mode-Ⅰ fracture testing Davies,P.;Benzeggagh,M.L.;Friedrich,K.(ed.)
  3. Application of Fracture Mechanics to Composite Materials;Composite Materials Series Relationship of matrix toughness to interlaminar fracture toughness Bradley,W.L.
  4. Composites Science and Technology v.39 Measurement of GIC and GIIC in carbon fiber/epoxy composites Davies,P.;Moulin,C.;Kausch,H.H.;Fischer,M.
  5. Journal of Composite Materials v.24 The effect of geometry, rate and temperature on the mode Ⅰ, mode Ⅱ and mixed-mode Ⅰ/Ⅱ interlaminar fracture of carbon-fiber/poly(ether-ether ketone) composites Hashemi,S.;Kinloch,A.J.;Williams,J.G.
  6. Composites Science and Technology v.37 Mechanics and mechanisms of delamination in a poly(ether sulphone)-fiber composites idem
  7. Journal of Composite Materials v.21 Rate Effects on Mode Ⅰ Interlaminar Fracture Toughness in Composite Materials Smiley,A.J.;Pipes, R.B.
  8. Journal of Materials Science v.24 Mechanisms for Rate Effects on Interlaminar Fracture Toughness of Carbon/Epoxy and Carbon/PEEK Composites Friedrich,K.;Walter,R.;Carlsson,L.A.;Smiley,A.J.;Gillespie Jr,J.W.
  9. Journal de Physique Ⅲ Frace Mechanical Characterization of Polymers and Composites with a Servohydraulic High-Speed Tensile Tester Beguelin,Ph.;Barbezat,M.;Kausch,H.H.
  10. Delamination and Debonding of Materials, ASTM STP876 Effects of Strain Rate on Delamination Fracture Toughness of Graphite/Epoxy Aliyu, A.A.;Daniel,I.M.
  11. Journal of Materials Science v.30 The Failure of Fiber Composites and Adhesively Bouded Fiber Composites under High Rates of Test Part Ⅰ: Mode Ⅰ Loading-Experimental Studies Blackman,B.R.K.;Dear,J.P.;Kinolch,A.J.;Macgillivray,H.;Wang,Y.;Williams,J.G.;Yayla,P.
  12. KSME International Journal v.12 A Study on Residual Fatigue Bending Strength and Damage Behavior of CFRP Composites Subjected to Impact Loadings Im,K.-H.;Kim,J.-H.;Yang,I-Y
  13. KSME International Journal v.11 Experiemental Investigation on Low Energy Impact Behavior of Foam Cored Sandwich Composites Yoon,S.H.;Kwon,Y.W.;Clawson Jr.,L.A.
  14. 대한기계학회논문집(A권) v.22 no.3 모드Ⅰ 하중조건하에 있는 다방향적층복합 재료의 층간파괴거동 최낙삼;Kinloch,A.J.
  15. 대한기계학회논문집(A권) 복합적층판의 층간파괴에 미치는 충격하중 속도의 효과 최낙삼;Kinloch,A.J.
  16. ASTM standard E-399 American Society for Testing and Materials
  17. Materials at High Strain Science The Effect of High Strain Rate on Material Properties Harding,J.;Blazynski,T.Z.(ed.)
  18. Journal of Reinforced Plastics and Composites v.2 Delamination of GIC in angle ply composites using a cantilever beam test method Nicholls,D.J.;Gallagher,J.P.
  19. Composites v.15 The characterization of mode Ⅰ delamination failure in non-woven, multidirectional laminates Chai,H
  20. Journal of Composite Materials v.26 A modofied DCB specimens for mode Ⅰ testing of multidirectional laminates Robinson,P.;Song,D.Q.
  21. Composites Science and Technology v.41 Mode Ⅰ interlaminar fracture of symmetrical cross-ply composites Laksimi,A.;Benzeggagh,M.L.;Jing,G.;Hecini,M.;Roelandt,J.M.