Effects of the maximum grit depth of cut on grinding characteristics

연삭가공특성에 미치는 연삭입자 최대물림깊이의 영향

  • 허인호 (경북대학교 대학원 기계공학과)
  • Published : 1999.10.01

Abstract

In tis study the effects of the maximum grit depth of cut on the grinding characteristics were investigated. They are AE signals produced during grinding processes have been studied to find out the appropriate AE parameters for assessing grinding processes. SM45C steel has been ground under the conditions yielding removal rate of workpiece 100, 200,300, and 400m{{{{ {m }^{3 } }}}}/min which was achieved by altering workpiece velocity(v) and apparent depth of cut(Z). According to the experimental result the value of surface roughness increases but grinding power energy rate of AE signal(AErmas2) and specific grinding energy consumed decrease as increasing the maximum grit depth of cut.

Keywords

References

  1. Grinding Technology : Theory and Appoicationof Machining with Abrasives S. Malkin
  2. Technol Reports of the Tohoku Universily v.20 On the Surface Roughness in Grinding K. Sato
  3. Interpretation of Grinding Data M. C. Shaw
  4. Ann. CIRP v.1 no.25 Monitoring of dressing and grinding processes with acoustic emission sig-nals I. Inasaki;K. Okamura
  5. Proc. of 4th Int. Grind. Conference Grinding process fedback using acoustic emission T. Blum;D. Dornfeld
  6. Proc. of 5th Int. Grind. Conference Monitoring and sensor concepts for higher process reliability W. Konig;T. Klumpen
  7. J. of Advan. Auto. Tech. v.5 no.4 Monitoring of grinding process wilth and AE sen-sor integrated CBN wheel M. Wakuda;I. Inasaki;K. Ogawa;T. Matsumoto
  8. Trans. ASME v.103 Quanti-tative Relationships for Acoustic Emission from Orthognal Metal Cutting Elijah. Kannatey-Asibu. Jr.;D. Domfeld
  9. Trans. ASME v.74 The Size Effect in Metal Cutting W. R. Baker;E. R. Marshall;M. C. Shaw
  10. Annals of the CIRP v.23 no.1 Specific Energy in single Point Grinding J. N. Brecker;M. C. Shaw