Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Surface Grinding Process by Slot-shaped Grinding Wheel

슬롯형상의 연삭숫돌에 의한 평면연삭가공

  • Published : 1999.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

An experimental study on the grinding temperature, surface roughness and Acoustic Emission(AE) signals was conducted with different shapes of wheel. The grinding characteristics for slotted shapes of wheel changed by width and helical angle, were compared with those by general one. Lower grinding temperature was obtained for 30$^{\circ}$helical angle with 10mm width and Root Mean square(RMS) values of AE signals were lower for slotted shapes rather than general one. Surface roughness characteristics of slotted shapes found to be rough but the value of roughness for 45$^{\circ}$helical angel with 6mm width, represented to similar tendency general one.

Keywords

References

  1. Annals of the CIRP v.43 A General Thermal Model for Grinding with Slotted or Segmented Wheel H. W. Zheng;H. Gao
  2. Annals of the CIRP v.43 Acoustic Emission for Process Control and Monitoring of Surface Integrity during Grin ding J. Webster;I. Marinescu;R. Bennett
  3. Annals of the CIRP v.43 no.1 Dimensional Characterization of Grinding Wheel Surface through Acoustic Emission Joao F.Gomes De Olikveira;David A.Dornfeld;Bernhard Winter
  4. 한국정밀공학회 '97년도 춘계학술대회 논문집 단속연삭의 유제공급 특성 곽용길;홍순익;송지복;구양
  5. 한국정밀공학회 '97년도 추계학술대회 연삭가공시 온도해석을 통한 열변형 예측 김강석;곽재섭;김남경;송지복
  6. Annals of the CIRP v.44 no.1 Experimental Investigation of Heat Transfer in Grinding W. B. Rowe;S. C. E. Black;B. Mills;H. S. Oi;M. N. Morgan
  7. Journal of Engineering for Industry v.114 Experimental Measurement of Fluid Flow Through the Grinding Zone F. Engineer;C. Guo;S. Malkin
  8. Journal of Engineering for Industry v.114 Analysis of Fluid Flow through the Grinding Zone C. Guo;S. Malkin
  9. Annals of the CIRP v.44 no.1 Energy Partition to the Workspiece for Grinding of Ceramics B. Zhu;C. Guo;J. E. Sunderland;S. Malkin
  10. 日本精密工學會誌 v.60 no.1 中島利勝 硏削の硏究と手法
  11. 日本精密工學會誌 通液溝付き砥石によるセラミックスとその複合材料のクリ-ピフイ-ド硏削 和井田 徹;野口豊生;メ-デイ.レザイ;須藤徹也
  12. 日本機械學會論文集(C編) v.55 no.511 AEを用にたフアインセラミックスの硏削き裂のインプロセス檢出 江田 弘;貴志浩三;夏書强;小倉政志
  13. 日本機械學會論文集(C編) v.55 no.511 AEを用にたフアインセラミックスの硏削き裂のインプロセス檢出 江田 弘;貴志浩三;夏書强;小倉政志
  14. 日本精密工學會誌 v.57 フアインセラミックスの濕式硏削溫度;硬ぜい材料の硏削加工に關する硏究 細川晃;安井平司;佐藤公俊
  15. 日本精密工學會誌 v.62 no.8 表面粗さの改善を促進させる熱變形速度制御硏削法 中島利勝;塚本眞也;濱野裕志;材上大介