Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지

The welding Characteristics of the Insertion Device Vacuum Chamber of PLS Storage Ring

가속기 저장링 삽입장치 진공 챔버의 용접

  • 최만호 (포항공과대학교 포항가속기연구소) ;
  • 한영진 (포항공과대학교 포항가속기연구소) ;
  • 김창균 (포항공과대학교 포항가속기연구소) ;
  • 정진화 (포항공과대학교 포항가속기연구소) ;
  • 권영각 (포항산업과학기술연구원)
  • Published : 1999.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

PAL(Pohang Accelerator Laboratory) designed and manufactured a 5m-long straight vacuum chamber to adopt U7 undulator that is the first insertion device. Top and bottom plates of the vacuum chamber were made of Al alloy A5083-H321, and welded together by the GTAW welding. The leak rate is less than 1×{TEX}$10^{-10}${/TEX} torr·ℓ/s with negligible welding deformation. The pressure has been maintained below {TEX}$10^{-10}${/TEX} torr after installation. This paper reports the welding process and the method applied to achieve ultimate vacuum performance and t satisfy integrity of welds.

Keywords

References

  1. 엔지니어링실 업무수행 보고서 포항가속기연구소
  2. 한국진공학회지 v.1 no.1 포항가속기 저장링 진공 Chamber 설계 김창균;길계환;최우천;박수용
  3. Aust. J. Phys. v.48 The Pohang Light Source Tong-Nyoung Lee;Moohyun Yoon;Young soo Kim;Hogil Kim
  4. 년차 보고서 포항가속기연구소
  5. 가속기저장링 건설 보고서 v.1 저장링부 진공실 포항가속기연구소
  6. 년차보고서 포항가속기연구소
  7. J. Kor. vacuum society v.1 no.3 Performance of a Prototype Sector Chamber of the PLS Storange Ring C. D. Park;H. Y. Kim;H. S. Youn;W. C. Choi
  8. 한국진공학회지 v.2 no.3 포할가속기 저장링 진공 Chamber 용접 최만호;정상수;김효윤;김명진;이해철;한영진;최우천
  9. TR/SR(CO)-90-009 Analysis of the Electrical signal Induced on a Pickup Electrode in PLS BPM System J. Y. Huang;M. K. Park;S. S. Chang;S. C. Won
  10. アルミニウム 合金超高眞空 システム の 構築技術 とその應用 · 例 原 淸明(외)
  11. J.Vac.Sci. v.41 no.7-9 An aluminum vacuum chamber for the bending manet of the SRRC syncrotron light source J.R.Chen;G.S.Chen;D.J.Wang;G.Y.Hsing;Y.C.Liu
  12. 한국진공학회지 v.3 no.4 포항 방사광 가속기 저장링 sector 챔버의 진공실험 한영진;최만호;김명진;이해철;김효윤;최우천
  13. EN/SR(VA)-92-019 Machining Specification of sector chamber for The PLS Storage H. Y. Kim;J. W. Lee;W. C. Choi
  14. Journal of Institute of Metals v.74 Pumphrey W.I.;Lyons J.V.
  15. 비파괴검사학회지 v.13 no.3 포항가속기 저장링 챔버의 헬륨누설검사 최만호;김형종;최우천
  16. 容接學會誌 v.53 no.4 超高眞空 ッステム 土屋和之
  17. アルニウム 合金 ミグ 溶接部の氣孔 防止 ァニュアル 輕金屬容接構造協會
  18. Annual Report Spring-8(japan)
  19. J.Vac.Sci.Technol. v.A2 no.2 Initial conditioning of TFTR vacuum vessel H.F.Dylla(외)
  20. J.Vac.Sci.Technol. v.A12 no.4 Construction and commissioning of the Sycrotron Radiation Research Center vacuum system G. Y. Hsiung(외)
  21. J.Vac.Sic.Technol. v.A8 no.3 Vacuum system design and fabrication of electron storage rings J. C. Schuchman