A Study on the Effect of Ca and P on the Microstructure in Solidification of Al-7wt%Si-0.3wt%Mg Alloy

Al-7wt%Si-0.3wt%Mg 합금의 응고시 미세조직에 미치는 Ca 및 P의 영향에 관한 연구

  • Kwon, Il-Soo (Research Institute of Steel Processing & Application, Hanyang University, and RASOM, Chungnam University) ;
  • Kim, Jeong-Ho (Research Institute of Steel Processing & Application, Hanyang University, and RASOM, Chungnam University) ;
  • Kim, Kyoung-Min (Research Institute of Steel Processing & Application, Hanyang University, and RASOM, Chungnam University) ;
  • Yoon, Eui-Pak (Research Institute of Steel Processing & Application, Hanyang University, and RASOM, Chungnam University)
  • 권일수 (한양대학교 철가공정 및 응용연구소 & 충남대학교 급속응고신소재연구소) ;
  • 김정호 (한양대학교 철가공정 및 응용연구소 & 충남대학교 급속응고신소재연구소) ;
  • 김경민 (한양대학교 철가공정 및 응용연구소 & 충남대학교 급속응고신소재연구소) ;
  • 윤의박 (한양대학교 철가공정 및 응용연구소 & 충남대학교 급속응고신소재연구소)
  • Published : 1998.08.20

Abstract

In this study, the influence of impurity element Ca, P on solidification behavior and morphology of eutectic silicon was examined by observation of microstructure and by DSC analysis. In the case of 1.3 ppm P, eutectic Si was fine and fibrous when the added amount of Ca was 500 ppm, However, the modification of eutectic Si was depressed by formation of polygonal Ca-Si compounds when the addition amount of Ca was greater than 1000 ppm. The addition of Ca 500 ppm depressed the primary and eutectic temperature. The primary and eutectic temperature were depressed with Ca 500 ppm but rather ascended when the addition amount of Ca was more than 1000 ppm. When the content of P was 17.5 ppm, eutectic Si had modified morphology with Ca addition. DAS was increased, the primary temperature was ascended and eutectic temperature was depressed with Ca added. Eutectic Si appeared as coarse flake phase and DAS was decreased with the increase of P content. The existence of P in the melt depressed the primary temperature and ascended eutectic temperature.

Keywords