3-D Crustal Velocity Tomography in the Central Korean Peninsula

한반도 중부지역의 3차원 속도 모델 토모그래피 연구

  • Kim, So Gu (The Seismological Institute, Hanyang University) ;
  • Li, Qinghe (Lanzhou seismological Institute, SSB Lanzhou)
  • Received : 1998.03.27
  • Published : 1998.06.28

Abstract

A new technique of simultaneons inversion for 3-D seismic velocity structure by using direct, reflected, and refracted waves is applied to the center of the Korean Peninsula including Pyongnam Basin, Kyonggi Massif, Okchon Fold Zone, Taebaeksan Fold Zone, Ryongnam Massif and Kyongsang Basin. Pg, Sg, PmP, SmS, Pn, and Sn arrival times of 32 events with 404 seismic rays are inverted for locations and crustal structure. 5 ($1^{\circ}$ along the latitude)${\times}6$ ($0.5^{\circ}$ along the longitude) ${\times}8$ block (4 km each layer) model was inverted. 3-D seismic crustal velocity tomography including eight sections from the surface to the Moho, eight profiles along latitude and longitude and the Moho depth distribution was determined. The results are as follows: (1) the average velocity and thickness of sediment are 5.15 km/sec and 3-4 km, and the velocity of basement is 6.12 km/sec. (2) the velocities fluctuate strongly in the upper crust, and the velocity distribution of the lower crust under Conrad appears basically horizontal. (3) the average depth of Moho is 29.8 km and velocity is 7.97 km/sec. (4) from the sedimentary depth and velocity, basement thickness and velocity, form of the upper crust, the Moho depth and form of the remarkable crustal velocity differences among Pyongnam Basin, Kyonggi Massif, Okchon Zone, Ryongnam Massif and Kyongsang Basin can be found. (5) The different crustal features of ocean and continent crust are obvious. (6) Some deep index of the Chugaryong Rift Zone can be located from the cross section profiles. (7) We note that there are big anisotropy bodies near north of Seoul and Hongsung in the upper crust, implying that they may be related to the Chugaryong Rift Zone and deep fault systems.

직접파, 반사파 및 굴절파를 사용해서 3차원 속도 구조를 결정하기 위한 동시역잔 토모그래피 기술을 한반도 중부에 적용하였다. 이곳은 평남 분지, 경기 육괴, 옥천 습곡대, 태백산 습곡대, 영남 육괴, 그리고 경상 분지를 포함한다. 32개 event의 Pg, Sg, PmP, SmS, Pn과 Sn 위상들을 포함한 총 404개 지진파선이 진원 위치와 지각구조 계산을 위해서 역산되었다. 5 (위도 따라 $1^{\circ}$) ${\times}6$ (경도 따라 $0.5^{\circ}$) ${\times}8$ (매 깊이 4km 두께)의 블럭모델이 역산된다. 따라서 표면에서 Moho까지 8개 단면도, 위도 경도를 따라서 8개 측면도, 그리고 Moho갚이 등이 결정된다. 그 결과는 다음과 같다. (1) 퇴적암의 평균속도와 두께는 5.15 km/sec과 3-4 km이다. 기반의 속도는 6.12 km/sec이다. (2) 상부지각에서 속도는 매우 불규칙하나 Conrad 법의 하부지각의 속도 변화는 근본적으로 변화가 없다. (3) Moho의 평균 깊이와 속도는 29.8 km와 7.97 km/sec이다. (4) 퇴적암 깊이와 속도, 기반암 두께와 속도, 상부지각 Moho 깊이의 모양, 평남 분지, 경기 육괴, 옥천대, 영남 육괴, 경상 분지 등의 현저한 속도 변화가 발견된다. (5) 해양과 대륙 지각의 틀린 지각구조가 분명하다. (6) 추가령 지구대의 저속도 심부 대칭모양이 측면도에서 뚜렷하게 발견되었다. (7) 서울 수도권 지역북부와 홍성지역의 상부지각에서 큰 저속도 이방체가 발견되었는데, 이것은 추가령지구대 및 심부 잠복단층과 관계가 있을 수 있는 큰 속도 이방체로 볼 수 있다.

Keywords