열처리공학회지 (Journal of the Korean Society for Heat Treatment)
- 제11권4호
- /
- Pages.247-257
- /
- 1998
- /
- 1225-1070(pISSN)
- /
- 2508-4046(eISSN)
고주파 표면경화된 중탄소강의 비틀림 피로강도에 미치는 초기조직의 영향
Effect of Prior Structure on Torsional Fatigue Strength of Induction Surface Hardened Medium Carbon Steel
- Kim, Heung-Jip (Daewoo Automotive Components, Ltd.) ;
- Chung, In-Sang (Dept. of Metall. Eng., College of Eng. Kyungpook National University)
- 발행 : 1998.12.31
초록
In order to evaluate the relation between prior structure and fatigue strength on a induction surface hardened medium carbon steel(SAE1050M) for automotive drive shafts, torsional fatigue test were conducted with various cases of different hardened depths and applied loads. Prior structures of the steel such as pearlite, fine pearlite and spheroidal pearlite were prepared by conventional nomalizing, tempering after quenching and spheroidized annealing, respectively. Maximum torsional fatigue strength can be obtained when the case depth is 18~25% diameter of the bar in each prior structure. The effect of case depth on the torsional fatigue strength was different depending on applied load to specimen, but the most good fatigue life was shown in the case of pearlitic structure when the case depth was 4.0~5.5mm(18~25% of bar diameter). Among three different prior structures, energy consumption, to obtain high strength or to get the same case depth, was the most saved in the case of pearlitic structure.