DOI QR코드

DOI QR Code

Elasto-plastic analysis using shell element considering geometric and material nonlinearities

  • Prasad, N. Siva (Department of Mechanical Engineering, Indian Institute of Technology) ;
  • Sridhar, S. (Department of Mechanical Engineering, Indian Institute of Technology)
  • Published : 1998.03.25

Abstract

An elasto-plastic finite element procedure using degenerated shell element with assumed strain field technique considering both material and geometric nonlinearities has been developed. This assumes von-Mises yield criterion, von-Karman strain displacement relations and isotropic hardening. A few numerical examples are presented to demonstrate the correctness and applicability of the method to different kinds of engineering problems. From present study, it is seen that there is a considerable improvement in the displacement valuse when both material and geometric nonlinearities are considered. An example of the spread of plastic zones for isotropic and anisotropic materials has been illustrated.

Keywords

References

  1. Bathe, K.J. and Dvorkin, E.N. (1985), "A four-node plate bending element based on Mindlin/Reissner plate theory and a mixed, interpolation", Int. J. Numer. Meth. Engng., 21, 367-383. https://doi.org/10.1002/nme.1620210213
  2. Hinton, E. and Owen, D.R.J. (1984), "Finite element software for plates and shells", Pineridge Press Ltd.
  3. Huang, H.C. (1987), "Membrane locking and assumed strain shell elements", Comput. and Struct., 27, 671-677. https://doi.org/10.1016/0045-7949(87)90083-6
  4. Huang, H.C. (1987), "Implementation of assumed strain degenerated shell elements", Comput. and Struct., 25, 147-155. https://doi.org/10.1016/0045-7949(87)90226-4
  5. Hunang, H.C. and Hinton, E. (1984), "A nine node lagranginan mindlin, plate element with enhanced shear interpolation", Eng. Comput., 1, 369-379. https://doi.org/10.1108/eb023593
  6. Hunang, H.C. and Hinton, E. (1986), "A new nine-node degenerated, shell element with enhanced membrane and shear interpolation", Int. J Numer. Meth. Engng., 22, 73-92. https://doi.org/10.1002/nme.1620220107
  7. Huang, H.C. (1989), "Static and dynamic analysis of plates and shells: theory, software and applications", Springer-Verlag.
  8. Owen, D.R.J. and Figueiras, J.A. (1983), "Anisotropic elasto-plastic finite element analysis of thick and thin plates and shells", Int. J Numer. Meth. Engng., 19, 541-566. https://doi.org/10.1002/nme.1620190407
  9. Owen, D.R.J. and Figueiras, J.A. (1983), "Elasto plastic analysis of anisotropic plates and shells by the semiloof element", Int. J Numer. Meth. Engng., 19, 73-92. https://doi.org/10.1002/nme.1620190109
  10. Pugh, E.D.L., Hinton, E. and Zienkiewicz, O.C. (1978), "A study of quardilateral plate bending element with reduced integration", Int. J Numer. Meth. Engng., 12, 1059-1079. https://doi.org/10.1002/nme.1620120702
  11. Zienkiewicz, O.C., Taylor, R.J. and Too, J.M. (1971), "Reduced integration techniques in general analysis of plates and, shells", Int. J Numer. Meth. Engng., 3, 275-290. https://doi.org/10.1002/nme.1620030211

Cited by

  1. Material and geometrical nonlinearities FEM and BEM analyses vol.38, pp.3, 2002, https://doi.org/10.1016/S0168-874X(01)00058-0
  2. Finite element linear and nonlinear, static and dynamic analysis of structural elements – an addendum – A bibliography (1996‐1999) vol.17, pp.3, 2000, https://doi.org/10.1108/02644400010324893