Elastomers and Composites

The Rubber Society of Korea (한국고무학회)
권호 표지

Post-operating Techniques for Non-toping Vulconization Process of Electric Cable Sheath in Autoclave

Autoclave를 이용한 전선피복용 고무의 무테이핑 가황공정시 후처리 운전기술

  • Kim, Duk-Joon (Dept. of Chemical of Engineering, Sung Kyun Kwan University) ;
  • Choi, Sang-Soon (Kukdong Research and Development Center) ;
  • Kim, Tae-Ho (Dept. of Polymer Science & Engineering, Sung Kyun Kwan University)
  • 김덕준 (성균관대학교 화학공학과) ;
  • 최상순 ((주)극동전선 연구소) ;
  • 김태호 (성균관대학교 고분자공학과)
  • Published : 1998.05.30
Download PDF
⟨ Previous Next ⟩

Abstract

The determination method of successful operation conditions to control the temperature and pressure in autoclave after non-taping vulcanization process was represented. Heat and mass balances were constructed to predict the mass flow rates of air, steam, and condensed water into or from autoclave when the temperature and pressure in the autoclave were to be controlled in the desired profiles. The balance equations were solved by appropriate mathematics, and the solution was applied to an autoclave system where the temperature and pressure were linearly decreased. The resulting solutions were illustrated in graphs.

Keywords