Improvement of floating ability and storage stability for jumbo granules

수면부상성 점보입제의 수면부상성 및 경시분해 안정성 개선

  • Kim, Seung-Ho (Agricultural Technology Research Institute, DongBu Hannong Chemical) ;
  • An, Byoung-Woo (Agricultural Technology Research Institute, DongBu Hannong Chemical) ;
  • Chung, Bong-Jin (Agricultural Technology Research Institute, DongBu Hannong Chemical)
  • 김승호 (동부한농화학(주) 농업기술연구소) ;
  • 안병우 (동부한농화학(주) 농업기술연구소) ;
  • 정봉진 (동부한농화학(주) 농업기술연구소)
  • Published : 1998.04.30

Abstract

This study was performed to develop jumbo granules floated and spreaded on the water surface after application, having low production and formulation cost, and safe to environment for paddy herbicides and to establish the formulation recipe. The jumbo granules of azimsulfuron with molinate(0.075+7.5%) was formulated by KCl as water soluble carrier and paraffin oil as solvent to impose the floating and spreading force to granules. That showed 100% of total granules to be floated on and spreaded upto the water surface within 25 minutes after application. Change in carriers, surfactants and pH did not affected to improve the time-course degradation of azimsulfuron in jumbo granules, but salt formation of azimsulfuron added by 1.15M solution of NaOH a little. Addition of N-methyl acrylate and modification of formulation process affected decrease in degradation of azimsulfuron upto 1.2, 2.1, and 7.2% after 2, 6 and 12 weeks under storage at $40{\pm}2^{\circ}C$, respectively, which showed the establishment of formulation recipe of the jumbo granules.

노력절감형 생력화제형인 수면부상성 점보형입제를 개발하는 데 있어서 대상 제초제인 sulfonyl urea의 경시분해 안정성 해결이 필수적이므로, 본 연구는 azimsulfuron+molinate (0.075+7.5%)를 대상약제로 선정하여 우수한 수면부상성과 주성분인 azimsulfuron의 경시분해 안정성 확립 및 이에 따른 제조공정을 확립하고자 하였다. 용제로는 paraffin oil이 선정되었고, 증량제로는 수면부상성에 더 효과적인 KCl이 선정되었으며, 이를 적용시켜 제제된 제품은 25분 안에 입자들의 100%가 부상하고 확산하는 우수한 수면부상성 및 확산성을 나타내었다. 주성분의 경시분해 안정성을 확보하고자 수행한 실험의 결과는 증량제, 계면활성제, pH의 변화에 따른 유의성 있는 개선 효과는 확인되지 않았으나 NaOH의 첨가량 변화에 따른 azimsulfuron의 염형성을 변화시킬 경우 NaOH 1.15M 조합에 다소 개선된 결과를 보였지만 충분하지 않았다. 그러나 제조공정을 변형시켜 실험한 결과 azimsulfuron을 white carbon에 액상인 sodium dialkyl sulfosuccinate로 흡착시킨뒤 분쇄하여 별도의 분상부분을 만들고 KCl, N-methyl acrylate, xanthan gum을 혼합시켜 고상 혼합부분과 재혼합한 후 반죽${\rightarrow}$조립${\rightarrow}$건조${\rightarrow}$액상부 살포 등의 방법으로 제제하였을 때, $40^{\circ}C$ 경시안정성 실험 결과 2주, 6주, 12주 후의 주성분 분해율이 1.2, 2.1, 7.2%로서 안정성이 뛰어난 제조 공정법을 확립할 수 있었다.

Keywords