Detectability and Sizing Ability of Rotating Pancake Coil Technique for Cracks in Steam Generator Tubes

  • Y. M. Cheong (Korea Atomic Energy Research Institute) ;
  • K. W. Kang (Korea Atomic Energy Research Institute) ;
  • Lee, Y. S. (Korea Atomic Energy Research Institute) ;
  • T. E. Chung (Korea Atomic Energy Research Institute)
  • Published : 1998.08.01

Abstract

Many nuclear power plants have experienced unscheduled shutdown due to the leakage of steam generator tubes. The leakages are normally due to the crack, possibly stress corrosion cracking (SCC) near the tube expansion at the top of tubesheet or at the tangential point of the row-1 U-bend region. The conventional eddy current technique, which makes use of a differential bobbin coil, has been found to be inadequate for the early detection of SCC. During the in-service inspection, therefore, it is a general practice that the rotating pancake coil (RPC) is used for detecting the cracks. Even in using RPC, however, it is difficult to determine the depth of the cracks quantitatively. This paper attempts to determine the detectability and sizing ability of RPC technique for axial or circumferential cracks at the tube expansion region. The simulated cracks with various dimensions were fabricated by electro-discharge machining (EDM) method. Experimental results are discussed with theoretical calculations.

Keywords

References

  1. Introduction to Electromagnetic Nondestructive Test Methods H. Libby
  2. British J. NDT A. Mcnab
  3. Development of Finite Element Model for Eddy Current NDT Phenomena, EPRI NP-2026 W. Lord
  4. Materials Evaluation C. V. Dodd(et al.)
  5. ORNL-4384 C. V. Dodd(et al.)
  6. ORNL-TM-3295 W. A. Simpson(et al.)
  7. J. of the Korean Society for Nondestructive Testing v.11 no.2 Y. M. Cheong