Performance Test and Model-Ship Correlation for a Waterjet Propulsion System

실선 물분사 추진장치 성능시험 및 모형선-실선 상관관계

  • 안종우 (선박해양공학연구센터 선박성능연구부) ;
  • 이창용 (선박해양공학연구센터 선박성능연구부) ;
  • 박영하 (선박해양공학연구센터 선박성능연구부) ;
  • 정종안 (한국기계연구원 구조시스템연구부) ;
  • 김병현 (한국기계연구원 구조시스템연구부)
  • Published : 1998.11.01

Abstract

This study describes sea trial tests for a waterjet propulsion system attached in the hybrid super high speed cargo ship named "Narae". A measuring technique of jet velocity, gross thrust and impeller torque for the waterjet system is explained. From the measured data in sea trial test, performance of the waterjet propulsion system is analyzed and compared with model test results of a similar waterjet system which was carried out in 1996. The erective horse power estimated from sea trial tests shows a good agreement with resistance test results of the model ship. The optimum rising height is estimated as 0.75 m, and the overall efficiency of the waterjet system is predicted as 0.315 at 15 knots. Useful data such as the pump performance, the jet efficiency, the losses of inlet duct and nozzle were obtained. Test results show a similar behavior to the model test results.

본 논문은 복합지지형 초고속 화물 시험선인 "나래"호에 장착된 물분사 추진장치에 대한 해상성능시험에 대하여 기술하였다. 물분사 추진 장치에서 제트 속도, 임펠러에 걸리는 추력 및 토오크 계측 방법에 대해 설명하였다. 해상성능시험 결과로부터 물분사 추진장치의 성능을 분석하였고, 1996년에 수행된 유사 물분사 추진장치 모형시험 결과와 비교하였다. 해상성능시험로부터 추정된 유효마력은 모형선 결과와 좋은 일치를 보여준다. 시험선의 최적 부상 높이는 0.75m로 추정되고 물분사 추진장치의 준추진효율은 15노트에서 0.315으로 추정되었다. 본 시험을 통하여 펌프의 성능, 제트 효율, 유입부 덕트와 노즐에서의 손실 등에 관한 유용한 자료를 확보하였으며, 모형시험 결과와 유사한 경향을 보여주었다.

Keywords

References

  1. 한국기계연구원 보고서, 보고서번호 UCN007-1589.D 차세대 추진장치 개발(Ⅲ) 김기섭;안종우(외)
  2. 대한조선학회 논문집 v.34 no.4 Pod형 물분사 추진장치 성능시험 연구 김기섭;송인행;안종우;문일성
  3. 선박해양기술 no.24 프로펠러 캐비테이션에 의한 변동압력 계측용 증폭시스템 개발 이창용;안종우;김병연
  4. 한국기계연구원 보고서, 보고서번호 UCN006-1588.D 복합지지 선형 도출 및 평가기술 개발 고창두;김은찬(외)
  5. 95 조선학회 추계연구발표회 Waterjet 추진장치의 모형시험 및 성능해석연구 김기섭;송인행;이진태
  6. Proceedings of the 21th ITTC Report of the Waterjets Group
  7. RINA International Symposium on Waterjet Propulsion Waterjet Testing in the SSPA Towing Tank G. Dyne;P. Lindell
  8. Application of Waterjets in High-Speed Craft R. Verbeek
  9. 유체기계 강창수(外)
  10. Proc. of the General Meeting of ATTC Model Testing of Waterjet Propelled Craft R. Etter