Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지

A Study on Cutting Tool Selection Techniques for Rough and Finish Turning Operations

선삭가공에서 황삭 및 정삭용 절삭공구선정방법에 관한 연구

  • 김인호 (동명정보대학교 정보공학부)
  • Published : 1998.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a development of computer aided cutting tool selection techniques for rough and finish turning operations. The developed system,. which is one of important activities for computer aided operation planning, firstly implements operation sequencing. Then, from relations of the size of machined area, recommended finishing allowance and maximum depth of cut, a main machining method is selected, a number of cut is calculated, cutting tools including toolholders and inserts are selected, and values for cutting parameters are determined. A cutting tool selection procedure is proposed for toolholders and inserts of ISO code in rough cutting, and some important parameters such as holder style, tool approach angle, tool function and its direction are described in detail. In order to demonstrate the validity of the system a case study is performed.

Keywords

References

  1. Int. J. Adv. Manuf. Technol. v.10 A Review of Knowledge-Based Expert Systems for Process Planning. Methods and Problems Kiritsis, D.
  2. Expert Process Planning for Manufacturing Chang, T.C.
  3. Proc. of $19^{th}$ CIRP Int. Seminar on Manufacturing Systems IPROS : A Variant Process Planning System Rasch, F.O.
  4. Advances in Manufacturing System Engineering v.PED-31 Introduction to an Intelligent Process Planning System for Rotational Parts Zhang, H.C.;Alting, L.
  5. Proc. of $19^{th}$ CIRP Int. Seminar on Manufacturing Systems CORE-CAPP: A Company-Oriented Semi-Generative Computer-Automated Process Planning System Li, J.;Han, C.;Ham, I.
  6. Robotics & Computer-Integrated Manufacturing v.10 no.1/2 Computer-Aided Process Planning-State of the Art and Future Development Eversheim, W.;Schneewind, J.
  7. Annals of the CIRP v.35 Stategy in generative planning of turning processes van Houten, F.J.M.;Kals, H.
  8. Ph. D. Thesis, University of Twente Generative Computer Aided Process Planning for Part Manufacturing van't Erve
  9. Annals of the CIRP v.37 Computer-aided process planning : the present and the future Ham, I.
  10. Annals of the CIRP v.42 no.2 Evolution and Future Perspectives of CAPP Elmaraghy, H.A.
  11. Computerized Manufacturing process Planning Systems Zhang, H.C.;Alting, L.
  12. Journal of Intelligent Manufacturing v.1 no.1 Feature extraction and feature based design approaches in the development of design interfaces for process planning Joshi, S.;Chang, T.C.
  13. Ph. D. Thesis, University of Twente PART: A Computer Aided Process Planning System van Houten, F.J.A.M.
  14. Annals of the CIRP v.45/1 Generation of Modeified Cutting Condition Using Neural Network for an Operation Planning System Park, M.W.;Rho, H.M.
  15. Annals of the CIRP v.41/1 An Integrated Cutting Tool Selection and Operation Sequencing Method Rho, H.M.;Geelink, R.;van't Erve, A.H.;Kals, H.J.J.
  16. Journal of Intelligent Manufacturing v.7 An integrated methodology for fixture design Cecil, J.;Mayer, R.;Hari, U.
  17. Int. J. Adv. Manuf. Technol. v.9 An Integrated Expert Operation Planning System with a Feature-Based Design Model Young, H.T.;Tsai, D.H.
  18. Ph. D. Thesis, University of Twente Tool management in Computer Aided Process Planning Boogert, R.M.
  19. 공정계획 및 품질관리 기술개발에 관한 연구 노형민(외)
  20. Proc. of $19^{th}$ CIRP Int. Seminar on Mfg. Systems Knowledge representation and reasoning techniques for process planning : extending SIPS to do tool selection Nau, D.S.;Luce, M.
  21. Proc. of $19^{th}$ CIRP Int. Seminar on Mfg. Systems Excap and Icap : knowledge-based systems for process planning components Wright, A.J.;Darbyshire, I.L.;Park, M.W.;Davies, B.J.
  22. Proc. of $19^{th}$ CIRP Int. Seminar on Mfg. Systems Know-how and knowledge assisted production planning system in the machining shop Iwata, K.;Fukuda, Y.
  23. 대한산업공학회지 v.18 no.1 선삭공정에서 CAD인터페이스된 자동공정계획시스템개발에 관한 연구(Ⅱ):작업준비계획의 자동화 조규갑;김인호
  24. Turning Tools and Inserts Sandvik Coromant
  25. Annals of the CIRP v.42 no.1 SITS-A Semi-Intelligent Tool Selection System for Turned Components Hinduja, S.;Barrow, G.