A Formation of the $Fluorocarbonated-SiO_2$ Films on Si(100) ASubstrate by $O_2/FTES-High$ Density Plasma CVD

  • Oh, Kyoung-Suk (Dept. of Physics, Cheju National University) ;
  • Kang, Min-Sung (Dept. of Physics, Cheju National University) ;
  • Lee, Kwang-Man (Dept. of Electronic Eng., Cheju National University) ;
  • Kim, Duk-Soo (Dept. of Chemistry, Cheju National University) ;
  • Kim, Doo-Chul (Dept. of Physics, Cheju National University) ;
  • Choi, Chi-Kyu (Dept. of Physics, Cheju National University) ;
  • Yun, Seak-Min (Dept. of Physics, Korea Advanced Institute of Science and Technology) ;
  • Chang, Hong-Young (Dept. of Physics, Korea Advanced Institute of Science and Technology)
  • Published : 1998.07.01

Abstract

Fluorocarbonated-SiO2 films were deposited on p-type Si(100) substrate using FSi$(OC_2H_5)_3$ (FTES), and $O_2$ mixture gases by a helicon plasms source. High density $O_2$/FTES/Ar plasma of ~$10^{12} \textrm{cm}^{-3}$ is obtained at low pressure (<3mTorr) with RF power above 900 W in the helicon plasma source. Optical emission spectroscopy (OES) is used to study the relation between the relative densities of the radicals and the film properties. The FTES and $O_2$ gases are greatly dissociated at the helicon mode that is launched at the above threshold plasma density. FTIR and XPS spectra shows that the film has Si-F, and C-F bonds during the formation process of the film which may lower the dielectric constant greatly. The relative dielectric constant, leakage current density, and dielectric breakdown voltage are about 2.8, $8\times10^{-9}\textrm{A/cm}^2$, and > 12 MV/cm, respectively.

Keywords