Measurement of HC Concentration near Spark Plug and Combustion Analysis

스파크플러그 주위의 HC 농도 측정 및 연소특성 분석

  • 조한승 (정회원, 아주대학교 대학원) ;
  • 송해박 (정회원, 아주대학교 대학원) ;
  • 이종화 (정회원, 아주대학교) ;
  • 이귀영 (정회원, 고등기술연구원)
  • Published : 1998.03.01

Abstract

Unburned hydrocarbon is a key contributor to both the fuel economy and emissions of automotive engine. Cyclic variation of HC emission is of importance, especially during throttle transients. The real time measurement of hydrocarbon is particularly important to obtain a better understanding of the mechanisms for combustion and emissions, especially during cold start and throttle transient condition. This paper reports the cycle resolved measurement technique of unburned hydrocarbons to quantify rapid changes of in-cylinder concentration in the vicinity of spark plug by using the Fast Response Flame Ionization Detector(FRFID). While this instrument actually measures fuel concentration, its results can be indicative of the AFR behaviour. In order to understand the rapid change of hydrocarbons with cylinder pressure, it is necessary to study the response time delay of the system, including the time associated with gas transportation to FID. And signal from FRFID is correlated with cylinder pressure data to relate changes in mixture preparation to the classic analysis, such as indicated mean effective(IMEF) and ignition delay, etc.

Keywords

References

  1. Internal Combustion Engine Fundamentals J. B. Heywood
  2. SAE paper 952478 Emissions Reduction During Warm-up Period by Incorporating a Wall-Wetting Fuel Model on the Fuel Injection Strategy during Engine Starting H. Kaoru;T. Hitoshi;A. Shusuke
  3. SAE paper 922170 Mixture Preparation in a SI Engine with Port Fuel Injection during Starting and Warm-up J. Fox;K. D. Min;W. K. Cheng;J. B. Heywood
  4. SAE paper, 922233 Measurement of Unburnt Hydrocarbons in a Spark Ignition Combustion Engine during Warm-up Period P. Brown;W. Woods
  5. SAE paper 871691 Cyclically Resolved HC Emissions from a Spark Ignition Engine N. Collings;J. Willey
  6. SAE paper 900484 In-Cylinder Measurements of Charge Inhomogeneity in a Spark-Ignition Engine G. R. Sleightholme
  7. SAE paper 932752 Impact of Exhaust Valve Leakage on Engine-Out Hydrocarbons P. R. Meernik;A. C. Alkidas
  8. SAE paper 950069 Mixture Preparation Measurements R. C. Meyer;R. H. Thring
  9. SAE paper 952485 An Experimental Investigation of Fuel Transport in a Port Injected Engine S. M. Schurov;N. Collings
  10. SAE paper 961201 Validation Tests for a Fast Response Flame Ionisation Detector for In-Cylinder Sampling Near the Spark Plug J. G. Grawford;J. S. Wallace
  11. KSAE 96380311 전기점화기관에서 실린더내 잔류가스량 측정방법에 관한 연구 조한승;이종화;이귀영
  12. HFR400 Fast FID User Manual Cambustion Ltd.
  13. SAE paper 841359 Heat Release Analysis of Engine Pressure Data J. A. Gatowski;E. N. Balles;K. M. Chun;F. E. Nelson;J. A. Ekchian;J. B. Heywood
  14. SAE paper 670931 A Universally Applicable Equation for Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine G. Woschni