한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)
- 제6권1호
- /
- Pages.143-150
- /
- 1998
- /
- 1225-6382(pISSN)
- /
- 2234-0149(eISSN)
차체접합과 관련한 접합 강도 평가
Strength Evaluation of Adhesive Bonded Joint for Car Body
초록
The evaluation of joint fatigue strength of light weight materials for electrical vehicle body has been performed through single lap joint tests with the design parameters such as joint style, adherend, bonding overlap length and bonding thickness. Fatigue strength was evaluated through 5-Hz, tension-tension, load controlled test with the stress ratio zero value. It is experimentally observed that fatigue strength of joint increases for the increase of overlap length. The combinations of Al-Al and Al-FRP adherends show that fatigue strength of joint is hardly changed for the increase of bonding thickness, but FRP-FRP adherend specimen shows that fatigue strength of joint increases after decreases for the increase of bonding thickness. Al-Al adherend specimen has much higher fatigue length than Al-FRP and FRP-FRP adherend specimens. Riveting at adgesive bonded joint gives little effect on fatigue strength.
키워드