Abstract
We investigated that the fabrication and reproducing signal characteristics of tri-layered magnetoresistance (MR) element for the high density magnetic thin film heads and sensors. Magnetoresistance curve of tri-layered MR element predicted by computer modeling was saturated above external field of -15 Oe~+22 Oe, and it was shifted to linearized region as large as 4 Oe. In the case of fabricated real device, magnetoresistance curve was saturated above external field of $\pm$15 Oe, and it was shifted to linearized region as large as 4 Oe. As shown in real device, MR response curve was in good agreement with the simulation results. As a result of experimental data of reproducing output signal in real device, it retained normal sinusoidal waveforms in 1~4 Oe external magnetic field. In this magnetic field region, the fabricated heads with tri-layered MR element can be operated with good reproduced characteristics. This will be beneficial to the use of efficient processes of manufacturing elements and the vacuum deposition techniques which control thin film properties.
고밀도 자성박막헤드 및 센서용 3층 자기저항소자의 제작 및 재생신호특성에 대해 연구하였다. 컴퓨터계산모형에 의해 설계된 3층 자기저항소자의 자기저항곡선은 외부자장 -15~+22 Oe 이상에서 포화되었으며, 이 곡선은 약 4 Oe 정도 선형화영역으로 이동되었다. 실제 제작된 소자에서 자기저항곡선은 외부자장 $\pm$15 Oe 이상에서 포화되었으며, tyjs형화 영역으로 4 Oe 만큼 이동되었다. 실제소자와 계산모형에서의 MR 반응곡선은 서로 잘 일치함을 보였다. 또한 실제소자에서 재생출력신호의 실험결과는 외부자장 $\pm$4 Oe 범위 내에서 정현파를 유지하였다. 이 자장 범위 내에서 3층 자기저항소자로 제작된 헤드는 양호한 재생출력특성을 나타낼 것으로 판단된다. 이는 박막물성을 제어하는 진공증착기술과 소자제작의 효율적인 제조공정으로 사용하는데 유익할 것이다.