DOI QR코드

DOI QR Code

급유구의 형상에 따른 박용엔진 크랭크 핀 베어링의 윤활특성 해석

Analysis of Crank Pin Bearing with Various Inlet Groove Shape for Marine Engine

  • 하양협 (부산대학교 정밀정형 및 금형가공 연구소) ;
  • 이득우 (부산대학교 정밀정형 및 금형가공 연구소) ;
  • 김정훈 (삼성중공업) ;
  • 이성우 (삼성중공업)
  • 발행 : 1998.09.01

초록

Crank pin bearing in two-stroke marine diesel engine is operated under quite severe conditions since the elements are big and heavy and the sliding speed is very slow. Therefore it is very difficult to form oil film. In this paper, two types of bearings with different groove shape are compared. One has circumferential oil groove at lower position and the other has lengthwise oil groove at upper position. Bearing clearance, oil inlet pressure and length to diameter ratio are selected as design parameters. Locus of journal center and minimum oil film thickness are investigated to compare two cases.

키워드

참고문헌

  1. Marine Engr. and Naval Arch. Crosshead of the New MAN KSZ engines Scobel, H.
  2. ASME Journal of Basic Engineering v.86 The Load Capacity of Short Journal Bearings with Oscillating Effective Speed Gupta, B. K.;Phelan, R. M.
  3. J. of Tribology Trans. ASME v.107 no.1 The Effect of Added Rotation on Crosshead Bearing Performance Takasaki, M.;Ettles, C. M. McC.
  4. STLE Tribology Transactions v.33 Oil Film Thickness in an Elastic Connecting-Rod Bearing Comparison between Theory and Experiment Bates, T. W.;Fantino, B.;Launay, L.;Fren, J.
  5. ASME Journal of Lubrication Technology v.102 no.3 A Generalized Short Bearing Theory Rohde, S. M.;Li, D.F.
  6. ASME Journal of Basic Engineering v.87 no.3 Dynamically-Loaded Journal Bearings : Moblilty Method of Solution Booker, J. F.
  7. Bulletin of the Marine Engineering Society in Japan Tokyo v.16 no.1 Lubrication of a Crosshead-Pin Bearing in a Two-Stroke Cycle Marine Diesel Engine Wakuri, Y.;Hamadake, T.;Soejima, M.
  8. Journal of the KSLE v.2 no.2 Optimum Design of Dynamically-Loaded Journal Bearings by Mobility Method Hyun-Hae Shim;Chang-Ho Kim;Park-Kyoun Oh;Oh Kwan Kwon
  9. Journal of Tribology v.111 Finite Element Analysis of Dynamically Loaded Flexible Journal Bearings : A Fast Newton-Raphson Method J. D. C. Mclvor;D. N. Fenner