DOI QR코드

DOI QR Code

Effect of Crystalline Lameliar Orientation on the Creep and Wear of Ultra-high Molecular Weight Polyethylene

초고분자량 폴리에틸렌 미세구조가 변형과 마모에 미치는 영향

  • 이권용 (대구대학교 자동차.산업공학부)
  • Published : 1998.09.01

Abstract

초고분자량 폴리에틸렌(Ultra-High Molecular Weight Polyethylene)은 인공관절 라이너에 쓰이는 대표적 생체재료이다. 초고분자량 폴리에틸렌의 변형과 마모에 영향을 주는 인자에 대한 기본적 연구를 위하여 본 연구에서는 미세구조 결정상의 정도와 결정구조 방향성에 따른 초고분자량 폴리에틸렌의 크리프 변형 및 마모 특성의 연구를 행하였다. 압출 제작된 초고분자량 폴리에틸렌 봉(extruded UHMWPE rod)단면의 중앙(center)부분과 원주(periphery)부분으로부터 각각 직사각형 및 원통형의 시편을 제작하여 크리프 실험과 마모 실험을 실시하였다. 원주 시편의 크리프 변형율은 중앙 시편의 크리프 변형율보다 11%크며(p<0.05), 마모량도 원주 시편이 중앙 시편보다 두 배나 큰 것으로 (p<0.05)관측되었다. 이 결고달로부터 초고분자량 폴리에틸렌의 크리프 변형과 마모가 미세 결정구조 방향성에 영향을 받는 것으로 나타났다.

Keywords

References

  1. Eng. Plastics, ASM International v.2 Ultrahigh Molecular Weight Polyethylene (UHMWPE), Engineered Materials Handbook H Stein
  2. J. Biomed. Mater. Res. v.29 Distinguishing Wear and Creep in Clinically Retrieved Polyethylene inserts MD McDonald;RD Bloebaum
  3. Clin. Orthop. v.311 The Problem is Osteolysis WH Harris
  4. Biomaterials v.17 Morphology of Rod Stock and Compression-moulded Sheets of Ultra-High-Molecular-Weight-Polyethylene used in Orthopaedic Implants A Bellare;RE Cohen
  5. Wear v.203;204 Orientation Softening in the Deformation and Wear of UHMWPE A Wang(et al.)
  6. Wear v.181;183 The Influence of Contact Stress on the Wear of UHMWPE for Total Replacement Hip Prostheses PSM Barbour(et al.)
  7. Wear v.162 Macroscopic and Microscopic Wear Mechanism in UHMWPE JR Cooper(et al.)
  8. J. Biomed. Mater. Res. v.39 Compressive Creep Characteristics of Extruded UHMWPE KY Lee;D Pienkowski
  9. Wear v.203;204 Reduction in the Initial Wear of UHMWPE after Compressive Creep Deformation KY Lee;D Pienkowski
  10. J. Polymer Sci. v.A-25 Heat of fusion of Polyethylene B Wunderlich;CM Cormier
  11. Trans. 5th World Biomaterial Congress v.2 UHMW-PE Variations Smaller than Perceived MA Evans;MD Lykins