An Experimental Study on the characteristics of Flow and Bed Topography with Changing Bed Material in a Curved Channel

만곡수로에서 하상재료 변화에 따른 흐름과 하상변동 특성에 관한 실험적 연구

  • Published : 1998.06.01

Abstract

The objective of this study is to analyze the characteristics of flow and bed topography with changing bed material in a 180-degree, with constant-radius curved experimental channel. Sand($D_{50}$ = 0.56 mm, s = 2.65) and anthracite($D_{50}$ = 0.26 mm, s = 1.54) were selected as bed materials. The maximum scour depth was found to be about two times for the mean flow depth at the outer bank of bend angle $30^{\circ}~60^{\circ}$, and in case of anthracite, it was found upper part of bend angle $5^{\circ}~15^{\circ}$ than that of sand. Regardless of bed materials the path of maximum streamwise velocity is skewed inwards in the upper part of the bend, the maximum velocity shifts outwards, and it lagged downward as bed roughness increases. The maximum skewed angle of flow grows faster in the smooth bottom than in the rough one, and its value also increases. The secondary flow in anthracite bottom was measured larger than that of sand one, and two cells of secondary flow was found in this experiment.

본 연구에서는 치수 및 이수에 있어서 항상 어려움을 겪고 있는 개수로 만곡구간에서 하상재료의 변화에 따른 흐름 및 하상변동 특성을 분석하기 위하여 중심각 180'인 만곡수로를 제작하고, 모래(D50 = 0.26 MM, S = 1.54)와 안트라싸이트(D50 = 0.26 mm, S = 1.54)를 하상재료로 선택하여 실험을 실시하였다. 실험결과, 최대세굴심은 만곡각 30'-60' 외측제방부근에서 평균수심의 약 2배까지 실측되었으며, 최대세굴심의 발생위치는 안트라싸이트인 경우에 모래에서보다 5'-15' 정도 상류부에서 관측되었다. 종단면 최대유속선은 하상재료와 관계없이 내측에서 외측으로 편의되고 있으며, 하상이 거칠수록 하류로 이동하였다. 하상이 매끄러울수록 흐름의 최대 편의각은 만곡수로 상류부에서 발생하고 있으며, 그 크기도 증가하였다. 안트라싸이트의 경우가 모래의 경우보다 2차흐름이 크게 발생하는 것으로 실측되었으며, 두개의 핵이 존재하는 현상이 관측되었다.

Keywords

References

  1. 한국수문학회지 v.8 no.2 만곡수로에서의 하상변동에 관한 연구 고재웅
  2. 대한토목학회논문집 v.17 no.Ⅱ-2 만곡수로에서의 횡방향 수면경사 산정모형의 비교 연구 김윤태;김지호;박영진;송재우
  3. 연세대학교 박사학위논문 우리나라 하천의 사행특성에 관한 연구 송재우
  4. 대한토목학회 논문집 v.14 no.6 유로만곡부의 횡방향 하상경사 산정모형에 관한연구 송재우;최인호;김지호
  5. 연세대학교 박사학위논문 수심이 얕은 고정상 만곡수로에서의 흐름특성 해석 윤세의
  6. 한국수문학회지 v.23 no.3 만곡수로에서의 곡률반경 변화에 따른 흐름특성 윤세의;이종태
  7. 대한토목학회논문집 v.14 no.1 유로 만곡부의 횡방향 하상경사에 관한 연구 정용태;최인호;송재우
  8. 1997년도 학술발표회 논문집 만곡수로에서의 흐름 및 하상변동에 관한 실험적 연구 정재욱;백창식;윤세의;이종태
  9. 한국수문학회지 v.24 no.1 만곡수로의 횡방향 하상경사와 흐름특성 차영기;이대철
  10. Ph. D. Thesis, The University of Iowa Fow processes in a curved alluvial channel Bergs, M.A.
  11. Earth Surface Processes v.2 Velocity profiles and bed shear stress over various bed configurations ina river bend Bridge, J.S.;jarvis, j.
  12. Earth Surface Processes v.1 Flow and sedimentary processes in the meandering river South Esk, Glen Clova, Scotland Bridge, J.S.;jarvis, J.
  13. Water Resources Research v.28 no.4 A revised model for water fow, sediment transport, bed topography and grain size sorting innatural river bend Bridge, J.S.
  14. Open channel hydraulics Chow, V. T.
  15. Report No. 76-1, Dept. of Civ. Engrg., Delft Univ. of Tech Amathematical model of steady flow in curved shallow channels De Vriend, H.J.
  16. J. of Fluid Mech v.107 Velocity redistribution in curved rectangular channels De Vriend, H.J.
  17. Tow Waterloopkundig laboratorium Delft Hydraulics Laboratory De Vriend, H.J.
  18. Water Resources Research v.19 no.5 Influence of the point bar on flow through curved channels Dietrich, W.E.;Smith, J.D.
  19. Water Resources Research v.20 no.101 Bed load transport in a river meander Dietrich, W.E.;Smith, J.D.
  20. J. of Hydraulic Research v.31 no.3 Behaviour of flow in a channel bend with a side overflow(flood relief) channel Fares, Y.R.;herbertson, J.G.
  21. J. of Geology v.83 Distribution of sediment transport and shear stress in a meander bend Hooke, R.L.B.
  22. J. Hydr. Engrg. v.113 no.2 Bed topography and sorting in bends Ikeda,S.;Yamasaka,M.;Chiyoda,M.
  23. J. Hydr. Engrg. v.113 no.2 Bed topography and sorting in bends Ikeda, S.;Yamasaka, M.;Chiyoda, M.
  24. Geological Society of America Bulletin v.86 Velocity-bed-from-texture patterns of meander bends in the lower Wabash River of Illinois and Indiana Jackson, R.G.; Ⅱ
  25. J. Hydr. Engrg v.120 no.2 Evaluation of methods for predicting bend loss in meandering channels James, C.S.
  26. J. Hydr. Engrg. v.119 no.1 Predicting flow in curved open channels by depth-averaged method Jin, Y. C.;Steffler, P.M.
  27. J. Hydr. Engrg. v.110 no.4 Flow and bed topography in alluvial channel bend Odgaard, A.J.
  28. J. Hydr. Engrg v.112 no.12 Meander flow model. I:development Odgaard, A.J.
  29. J. Hydr. Engrg. v.112 no.12 Meander flow model. II:applications Odgaard, A.J.
  30. Water Resources Research v.24 no.1 Flow processes in a curved alluvial channel Odgaard, A.J.;Bergs, M.A.
  31. J. of the Hydr. Div. v.102 no.HY7 Effects of meandering in alluvial streams Onishi, Y.;Jain, S.C.;Kennedy, J.F.
  32. Water Resources Research v.21 no.9 Sorting of bed load sediment by flow in meander bends Parker, G.;Andrews, E.D.
  33. Translated from Russian by the Israel program for scientific translations Flow of water in bends of open channels Rozovskii, I.L.
  34. Ph. D. thesis, University of Alberta Turbulent flow in a curved rectangular channel Steffler, P.M.
  35. J. of Hydraulic Research v.33 no.4 Laboratory measurements of the direction of sediment transport on transverse alluvial-bed slopes Talmon, A.M.;Van Mierlo, M.C.L.M.;Struiksma, N.
  36. J. of the Hydr. Div. v.96 no.HY1 Bed topography effect on flow ina meander Yen, C.L.