A Study on the Prediction and Control of Welding Deformation of the BRACKET TILT in Automotive Parts (I) - Application of FEA-

자동차 부품 BRACKET TILT의 용접변형 예측 미 제어에 관한 연구 (II) -유한요소법의 적용-

  • Published : 1998.12.01

Abstract

In the previous study, the countermeasure for welding deformation of bracket tilt is through up through experimental inspection for total process including welding process. For completeness of systematic examination of parts having sensitivity on welding deformation, the comparison and feedback between the result through simulation of welding process and experimental data is needed. In other words, it is necessary to control welding deformation that construct the prediction system for welding deformation through comparison and tuning with experimental data. In the present study, the application of FEA on welding process of bracket tilt with susceptibility to deformation is made and deformation behavior through change of welding sequence is focused on. It is used to improve the exactness of deformation analysis that three dimensional analysis for moving heat source, activated and deactivated bead element, and volume heat flux etc.

Keywords

References

  1. Research Activities Examine Residual Stresses and Distortion in Welded Structures Koichi Masubuchi
  2. Analysis of Welded Structures Koichi Masubuchi
  3. 대한용접학회지 v.15 no.5 용접 구조물의 변형 예측에 관한 연구 서승일;장창두
  4. Prediction and Measurement of Residual Elastic Strain Distribution in Gas Tungsten Arc Welds K. W. Mahin;W. Winter;T.M. Holden
  5. Ph. D. Thesis, MIT., Cambridge, Mass. Analytical techniques for determining temperatures, thermal strains, and residual stresses during welding V.J., Papazoglou
  6. Computer and Structures v.3 no.11 A numerical thermo-mechanical model for the welding H.D. Hibbitt;P.V. Marcal
  7. Journal Press. Vessel Tech. ASME, series J Thermomechanical analysis of the welding process using finite element method E. Friedman
  8. Finite Element Anaylsis of Three Dimensional Transient Heat Transfer in GMA welding P. Tekriwal;J. Mazumder
  9. Ph.D. Thesis, Carnegie-Mellon University FEM model of 3D transient temperature and stress fields in welded plates S.Z., Newman
  10. 대한용접학회지 v.11 no.3 용접 잔류응력 해석을 위한 Heat Input Model 개발 심용래;이성근
  11. Welding Journal v.9 Determination of Residual Stress in Thick-section Weldments Y. Shim;Z. Feng