References
- 대한기계학회지 v.33 no.8 국내 화력발전소의 보일러 및 압력 용기의 현안과제 및 향후대책 김건영
- Materials Science Eng. v.A131 Creep Fracture Behavior of 2.25Cr-1Mo Welds from a 31-year-old Fossil Power Plant P. K. Liaw;G. V. Rao;M. G. Burke
- ASTM STP 905 Creep Crack Growth under Non-Steady State Condition A. Saxena
-
ASTM STP 995
Evaluation of the
$C_t$ Parameter for Characterizing Creep Crack Growth Rate in the Transient Regime J. L. Bassani;D. E. Hawk;A. Sexena -
International Journal of Fracture
v.46
Inclusion of Primary Creep in the Estimation of the
$C_t$ Parameter C. P. Leung;D. L. McDowell - 저합금강 용접부의 크리프 균열성장거동 모델링 윤기봉;김광웅
- ASTM STP 1131 Influence of Crack-Tip Plasticity on Creep-Fatigue Crack Growth, Fracture Mechanics K. B. Yoon;A. Saxena;D. L. McDowell
- ASTM Standard, E 1457-92 Standard Test Method for Measurement of Creep Crack Growth Rates in Metals
- Materials Research and Standard v.5 no.9 Calibration of the Electric Potential Method for Studying Slow Crack Growth H. H. Johnson
- Journal of Testing and Evaluation v.9 no.3 Application of the Electrical Potential Method to Crack Length Measurements Using Johnson's Formula K. H. Schwalbe;D. Hellmann
- Eng. Fracture Mechanics v.13 no.4 Electrical Potential Technique For Monitoring Subcritical Crack Growth at Elevated Temperature A. Saxena
- 산업안전학회논문집 v.12 no.2 1Cr-0.5Mo 강 용접부 균열의 고온파괴거동 연구 신규인;윤기봉;최현창;박재학;이해무
- ASTM STP 791 Unified Solution for J Ranging continously from Pure Bending to Pure Tension H. A. Ernst
- International Journal of Fracture v.23 Creep Crack Growth Behavior in 316 Stainless Steel at 594˚C A. Saxena;H. Ernst;J. D. Landes
- Technical Report EPRI NP-1931 An Engineering Approach to Elastic-Plastic Analysis V. Kumar;M. D. German;C. F. Shih