Abstract
The objective of this study is to examine fatigue behavior of as-welded butt-welded joints with incomplete penetration from fatigue tests. The test results are the following. In static tests, tensile strength and yield strength of butt-welded joints are constant regardless of incomplete penetration. And in fatigue tests, fatigue strength of fully penetrated butt-welded joints satisfies fatigue limits, prescribed in Korean Specifications and JSSC, respectively. The results show that as the magnitude of incomplete penetration increases, fatigue strength decreases. In fractured surfaces, full and incomplete penetration specimen show different shapes, it is because that stress concentration factor vary with structural geometry in bead toe and root tip, and certify in FEM analysis. This study suggests that defects such as incomplete penetration from welding must be avoided in order to attain the sufficient life of steel structures.
본 연구에서는 평면결함의 일종인 용입부족의 크기가 맞대기 용접부의 피로 특성에 미치는 영향을 정량적으로 규명하였다. 정적실험 결과 비드를 삭제하지 않은 맞대기 용접부의 인장강도와 항복강도는 용입부족 크기에 관계없이 일정하였다. 또한 피로실험 결과 완전용입된 맞대기 용접부의 피로강도는 국내 외의 시방서에서 규정하고 있는 피로 등급을 모두 만족하며, 용입부족 크기에 따른 피로강도의 저하는 용입부족 크기가 증가함에 따라 피로강도가 급격하게 감소하였다. 파단형태에서 완전용입 시험체와 용입부족 시험체의 파단형태가 서로 다른 형식을 취하고 있음을 알 수 있었는데 이는 용접지단부와 용접루트부의 기하학적 형상에 따른 응력집중계수의 변화에 기인하는 것을 유한요소해석에서 확인하였다. 따라서 강구조물에 대한 용접제작시 발생할 수 있는 용접결함 중 평면결함의 일종인 용입부족은 반드시 피해야만 강구조물의 공용수명을 충분히 확보할 수 있을 것이다.