Korean Journal of Food Science and Technology (한국식품과학회지)
- Volume 30 Issue 1
- /
- Pages.110-117
- /
- 1998
- /
- 0367-6293(pISSN)
Continuous Production of Isomaltooligosaccharides by Immobilized Transglucosidase in a Packed-bed Reactor
충진형반응기에서 고정화 Transglucosidase를 이용한 이소말토올리고당의 연속생산
- Ahn, Jang-Woo (Department of Food Science and Technology, Chungkang College of Cultural Industries) ;
- Park, Kwan-Wha (Department of Food Science and Technology and Research Center for New Bio-Materials in Agriculture, Seoul National University) ;
- Seo, Jin-Ho (Department of Food Science and Technology and Research Center for New Bio-Materials in Agriculture, Seoul National University)
- Published : 1998.02.01
Abstract
A packed-bed reactor with immobilized transglucosidase (TG) was operated to test the possibility of continuous production of isomaltooligosaccharides (IMO) and the effect of concentration and feed rate of substrate solution on the production pattern as well as operational stability The pattern of formation of IMO was the same to the one of soluble TG. The concentrations of glucose and isomaltose produced by the packed-bed reactor were gradually decreased as the flow rates were increased regardless of the concentrations and kinds of maltose solution as substrate. Isomaltotriose showed the same tendency except 10% maltose solution. But the concentration of panose was increased and then decreased as the flow rates were increased. The maximum yield of IMO was 52.1% when 10% (w/v) solution was fed to the reactor at 2 mL./min feed rate. When each 20% and 30% (w/v) solution was respectively used at
고정화 transglucosidase (TG)를 이용한 충진형 반응기를 만들어 isomaltooligosaccharides (IMO)의 연속생산 가능성을 살펴보고 기질용액의 농도와 유속에 따른 반응산물의 생성패턴과 운전안정성을 조사하였다. 고정화 TG에 의한 IMO의 생성패턴은 soluble TG의 경우와 동일하였다. 충진형반응기에 의해 생성된 포도당과 isomaltose의 농도는 기질인 maltose 용액의 농도와 종류에 관계없이 유속의 증가에 따라 지속적으로 감소되는 경향을 보였고 isomaltotriose 역시 10% 기질용액을 사용한 경우를 제외하고 같은 경향을 보였다. 반면, panose의 농도는 유속의 증가에 따라 증가하다가 감소하는 경향을 보였다. 기질농도가 10% 일 때, IMO의 최대수율은 2 mL/min 유속에서 52.1%였고, 20%와 30% (w/v)일 때는,