Performance Analysis of Traffic Shaper for an MPEG Video Source

MPEG 비디오원을 대상으로 한 트래픽 쉐이퍼의 성능 분석

  • 이상천 ((주)대우전자부품 기술연구소) ;
  • 이명용 (한국통신 통신망연구소) ;
  • 홍정식 (서울산업대학교 산업공학과) ;
  • 이창훈 (서울대학교 산업공학과)
  • Received : 19950900
  • Published : 1997.03.31

Abstract

In this paper, performance analysis of video traffic shaper for Motion Picture Experts Group (MPEG) video traffic in on ATM network are investigated. Traffic shaping for MPEG video traffic is proposed as a traffic control function in ATM networks. The proposed shaper smoothes video traffics by controling the output rate of the buffer, which is placed in an MPEG source, according to I,B,P frame sequences of MPEG. In performance analysis of an video traffic shaper, a periodic botch arrival model is suggested to describe cell streams in a frame of MPEG video traffic. The queueing model which has periodic independent botch arrival and periodic deterministic service time is used to obtain the cell loss ratio, the mean cell delay, and the measure of smoothing effect. Simulation results are used to validate this queueing model. The cell loss performance of ATM multiplexer is measured by simulation study with real MPEG-1 data. From the viewpoint of traffic load, the cell loss ratio is observed to be considerably high, which is considered to result from the burstiness of MPEG video traffic. As a result, it is shown that the shaping decreases cell loss ratio of multiplexer. The results of this paper can be employed to establish a basic guideline in the implementation of a traffic control scheme and the design of ATM multiplexer for MPEG video traffic.

Keywords

Acknowledgement

Supported by : 한국통신통신망연구소