DOI QR코드

DOI QR Code

Optimal reinforcement design of structures under the buckling load using the homogenization design method

  • Min, Seungjae (Department of Mechanical Engineering and Applied Mechanics, University of Michigan) ;
  • Kikuchi, Noboru (Department of Mechanical Engineering and Applied Mechanics, University of Michigan)
  • 발행 : 1997.09.25

초록

The material-based homogenization design method generates arbitrary topologies of initial structural design as well as reinforcement structural design by controlling the amount of material available. However, if a small volume constraint is specified in the design of Lightweight structures, thin and slender structures are usually obtained. For these structures stability becomes one of the most important requirements. Thus, to prevent overall buckling (that is, to increase stability), the objective of the design is to maximize the buckling load of a structure. In this paper, the buckling analysis is restricted to the linear buckling behavior of a structure. The global stability requirement is defined as a stiffness constraint, and determined by solving the eigenvalue problem. The optimality conditions to update the design variables are derived based on the sequential convex approximation method and the dual method. Illustrated examples are presented to validate the feasibility of this method in the design of structures.

키워드

참고문헌

  1. Bendsoe M.P. and Kikuchi, N. (1988), "Generating optimal topologies in structural design using a homogenization method", Comp. Meth. Appl. Mech. Eng., 71, 197-224. https://doi.org/10.1016/0045-7825(88)90086-2
  2. Bendsoe, M.P. and Mota Soares, C.A. (1993), Topology Design of Structures, Kluwer, Dordrecht.
  3. Diaz, A. and Kikuchi, N. (1992), "Solutions to shape and topology eigenvalue optimization problems using a homogenization method", Int. J. Num. Meth. Eng., 35, 1487-1502. https://doi.org/10.1002/nme.1620350707
  4. Guedes, J.M. and Kikuchi, N. (1990), "Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite elements methods", Comp. Meth. Appl. Mech. Eng., 83, 143-198. https://doi.org/10.1016/0045-7825(90)90148-F
  5. Haftka, R.T. and Gurdal, Z. (1992), Elements of Structural Optimization, Kluwer, Dordrecht.
  6. Hughes, T.J.R. (1987), The Finite Element Method, Prentice-Hall, Englewood Cliffs, NJ.
  7. Kamat, M.P., Khot, N.S. and Venkayya, V.B. (1984), "Optimization of shallow trusses against limit point instability", AIAA J., 22, 403-408. https://doi.org/10.2514/3.48461
  8. Khot, N.S., Venkayya, V.B. and Berke, L. (1976), "Optimum structural design with stability con-straints", Int. J. Num. Meth. Eng., 10, 1097-1114. https://doi.org/10.1002/nme.1620100510
  9. Ma, Z.-D., Kikuchi, N., Cheng, H.-C. and Hagiwara, I. (1995), "Topological optimization technique for free vibration problems", J. of Appl. Mech., 62, 200-207. https://doi.org/10.1115/1.2895903
  10. Mayer, R.R., Kikuchi, N. and Scott, R.A. (1996), "Application of topological optimization tech-niques to structural crashworthiness", Int. J. Num. Meth. Eng., 39, 1383-1403. https://doi.org/10.1002/(SICI)1097-0207(19960430)39:8<1383::AID-NME909>3.0.CO;2-3
  11. Neves, M.M., Rodrigues, H. and Guedes, J.M. (1995), "Generalized topology design of structures with a buckling load criterion", Struct. Optim., 10, 71-18. https://doi.org/10.1007/BF01743533
  12. Pedersen, P. (1989), "On optimal orientation of orthotropic materials", Struct. Optim., 1, 101-106. https://doi.org/10.1007/BF01637666
  13. Suzuki, K. and Kikuchi, N. (1991), "A homogenization method for shape and topology optimization", Comp. Meth. Appl. Mech. Eng., 83, 143-198.
  14. Zienkiewicz, O.C. and Taylor, R.L. (1989), The Finite Element Method, McGraw-Hill, London.

피인용 문헌

  1. A performance-based optimization method for topology design of continuum structures with mean compliance constraints vol.191, pp.13-14, 2002, https://doi.org/10.1016/S0045-7825(01)00333-4
  2. On compliance and buckling objective functions in topology optimization of snap-through problems vol.47, pp.3, 2013, https://doi.org/10.1007/s00158-012-0832-2
  3. Optimal structural design considering flexibility vol.190, pp.34, 2001, https://doi.org/10.1016/S0045-7825(00)00329-7
  4. Integrated Discrete/Continuum Topology Optimization Framework for Stiffness or Global Stability of High-Rise Buildings vol.141, pp.8, 2015, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001164
  5. A review on structural enhancement and repair using piezoelectric materials and shape memory alloys vol.21, pp.1, 2012, https://doi.org/10.1088/0964-1726/21/1/013001
  6. Minimal compliance topologies for maximal buckling load of columns vol.51, pp.5, 2015, https://doi.org/10.1007/s00158-014-1202-z
  7. A simple alternative formulation for structural optimisation with dynamic and buckling objectives vol.55, pp.3, 2017, https://doi.org/10.1007/s00158-016-1544-9
  8. Topology optimization of continuum structures under buckling constraints vol.157, 2015, https://doi.org/10.1016/j.compstruc.2015.05.020
  9. An Adaptive Continuation Method for Topology Optimization of Continuum Structures Considering Buckling Constraints vol.09, pp.07, 2017, https://doi.org/10.1142/S1758825117500922
  10. Elimination of the Effects of Low Density Elements in Topology Optimization of Buckling Structures vol.13, pp.06, 2016, https://doi.org/10.1142/S0219876216500419
  11. Linear buckling topology optimization of reinforced thin-walled structures considering uncertain geometrical imperfections vol.62, pp.6, 2020, https://doi.org/10.1007/s00158-020-02738-6