DOI QR코드

DOI QR Code

Progressive failure of symmetrically laminated plates under uni-axial compression

  • Singh, S.B. (Indian Institute of Technology Kanpur) ;
  • Kumar, Ashwini (Indian Institute of Technology Kanpur) ;
  • Iyengar, N.G.R. (Indian Institute of Technology Kanpur)
  • 발행 : 1997.07.25

초록

The objective of this work is to predict the failure loads, associated maximum transverse displacements, locations and the modes of failure, including the onset of delamination, of thin, flat, square symmetric laminates under the action of uni-axial compression. Two progressive failure analyses, one using Hashin criterion and the other using Tensor polynomial criteria, are used in conjunction with the finite element method. First order shear deformation theory and geometric nonlinearity in the von Karman sense have been employed. Five different types of lay-up sequence are considered for laminates with all edges simply supported. In addition, two boundary conditions, one with all edges fixed and other with mixed boundary conditions for $(+45/-45/0/90)_{2s}$ quasi-isotropic laminate have also been considered to study the effect of boundary restraints on the failure loads and the corresponding modes of failure. A comparison of linear and nonlinear results is also made for $({\pm}45/0/90)_{2s}$ quasi-isotropic laminate. It is observed that the maximum difference between the failure loads predicted by various criteria depend strongly on the laminate lay-ups and the flexural boundary restraints. Laminates with clamped edges are found to be more susceptible to failure due to the transverse shear and delamination, while those with the simply supported edges undergo total collapse at a load slightly higher than the fiber failure load.

키워드

참고문헌

  1. Agrawal, B.D. and Broutman (1980), Analysis and Performance of Fiber Composites, Wiley, New York.
  2. Engelstad, S.P., Reddy, J.N. and Knight, N.F. Jr. (1992), "Postbuckling response and failure prediction of graphite epoxy plates loaded in compression", AIAA Journal, 30, 2106-2113. https://doi.org/10.2514/3.11187
  3. Hashin, Z. (1980), "Failure criteria for unidirectional fiber composites", J. Appl. Mech, 47, 329-334. https://doi.org/10.1115/1.3153664
  4. Jones, R.M. (1975), Mechanics of Composite Materials, Scripta, Wasington, DC.
  5. Kam, T.Y. and Sher, H.F. (1995), "Nonlinear and first-ply failure analysis of laminated composite cross-ply plates", J. of Composite Materials, 29, 463-485. https://doi.org/10.1177/002199839502900403
  6. Lee, H.H. and Hyer, M.W. (1993), "Postbuckling failure of composite plates with holes", AIAA J., 31, 1293-1298. https://doi.org/10.2514/3.11766
  7. Reddy, J.N. and Pandey, A.K. (1987), "A firtst-ply failure analysis of composite laminates", Computers and Structures, 25, 371-393. https://doi.org/10.1016/0045-7949(87)90130-1
  8. Reddy, Y.S.N. and Reddy, J.N. (1992), "Linear and Non-linear failure analysis of composite laminates with transverse shear", Composite Science and Technology, 44, 277-255.
  9. Tsai, S.W. (1984), "A surve of macroscopic failure criteria for composite materials", Technical Report AFWAL-TR-84-4025.
  10. Tsai, S.W. (1986), "Composite design", Think Composite, Day-ton, OH.
  11. Turvey, G.J. (1980a), "An initial flexural failure analysis of symmetrically laminated cross-ply rectangular plates", Int. J. Solids and Struct., 16, 451-463. https://doi.org/10.1016/0020-7683(80)90043-8
  12. Turvey, G.J. (1980b), "Flexural failure analysis of angle-ply laminates of GFRP and CFRP", J. Strain Analysis, 15, 43-49. https://doi.org/10.1243/03093247V151043
  13. Turvey, G.J. (1980c), "A study of the onset of flexural failure in cross-ply laminated strips", Fiber Sci. Technology, 13, 325-356. https://doi.org/10.1016/0015-0568(80)90008-1
  14. Turvey, G.J. (1981), "Initial flexural failure of square, simply supported, angle-ply plates", Fiber Sci. Technol., 15, 47-63. https://doi.org/10.1016/0015-0568(81)90031-2
  15. Turvey, G.J. (1982), "Uniformly loaded, antisymmetric cross-ply laminated, rectangular plates:an initial flexural failure analysis", Fiber Sci. Technol., 15, 1-10.
  16. Turvey, G.J. (1987), "Effects of shear deformation on the onset of flexural failure in symmetric cross-ply laminated rectangular plates", Composite Structures, 4, ed. I.H. Marshall, Elsevier applied Science, London, 141-146.

피인용 문헌

  1. Progressive failure of symmetric laminates under in-plane shear : I-positive shear vol.6, pp.2, 1998, https://doi.org/10.12989/sem.1998.6.2.143
  2. Progressive failure analyses of compression-loaded composite curved panels with and without cutouts vol.65, pp.2, 2004, https://doi.org/10.1016/S0263-8223(03)00184-3
  3. Progressive failure studies of stiffened panels subjected to shear loading vol.65, pp.2, 2004, https://doi.org/10.1016/S0263-8223(03)00153-3
  4. Review of Degradation Models for Progressive Failure Analysis of Fiber Reinforced Polymer Composites vol.62, pp.1, 2009, https://doi.org/10.1115/1.3013822
  5. Postbuckling response of square laminates with a central circular/elliptical cutout vol.65, pp.2, 2004, https://doi.org/10.1016/j.compstruct.2003.10.014
  6. Progressive Failure Analysis of Laminated Composite Cylindrical Shell Roofs vol.15, pp.3, 2015, https://doi.org/10.1007/s11668-015-9951-6
  7. Probabilistic Risk Assessment Strategy for Damage-Tolerant Composite Spacecraft Component Structural Design vol.40, pp.1, 2003, https://doi.org/10.2514/2.3917
  8. Postbuckling response of composite laminated plates with evolving damage vol.23, pp.2, 2014, https://doi.org/10.1177/1056789513489322
  9. Postbuckling response and failure of symmetric laminates under in-plane shear vol.58, pp.12, 1998, https://doi.org/10.1016/S0266-3538(98)00032-3
  10. Progressive failure of triaxial woven fabric (TWF) composites with open holes vol.65, pp.3-4, 2004, https://doi.org/10.1016/j.compstruct.2003.12.004
  11. Response and failure of square laminates under combined loads vol.55, pp.3, 2002, https://doi.org/10.1016/S0263-8223(01)00141-6
  12. Progressive failure of symmetric laminates under in-plane shear: Il-Negative shear vol.6, pp.7, 1998, https://doi.org/10.12989/sem.1998.6.7.757
  13. Postbuckling response and strength of laminates under combined in-plane loads vol.59, pp.5, 1999, https://doi.org/10.1016/S0266-3538(98)00125-0
  14. Postbuckling response and failure of symmetric laminated plates with rectangular cutouts under uniaxial compression vol.29, pp.4, 2008, https://doi.org/10.12989/sem.2008.29.4.455
  15. Postbuckling response and failure of symmetric laminates under uniform temperature rise vol.59, pp.1, 2003, https://doi.org/10.1016/S0263-8223(02)00186-1
  16. Progressive failure and post-buckling response of tapered composite plates under uni-axial compression vol.82, pp.2, 2008, https://doi.org/10.1016/j.compstruct.2006.12.014
  17. Progressive failure analysis of carbon-fiber reinforced polymer (CFRP) laminates using combined material nonlinear elasticity and continuum damage mechanics based on treatment of coupon test vol.50, pp.11, 2016, https://doi.org/10.1177/0021998315592006
  18. Progressive Failure Analysis of Composite Laminates Subjected to In-Plane Compressive and Shear Loadings vol.11, pp.2, 1997, https://doi.org/10.1515/secm.2004.11.2-3.79
  19. Nonlinear first ply failure analysis of composite skewed hypar shells using FEM vol.68, pp.1, 1997, https://doi.org/10.12989/sem.2018.68.1.081
  20. A Numerical and Experimental Study on the Impact Behavior of a Carbon-Fiber-Reinforced Thermoplastic Poly (Methyl Methacrylate) Composite vol.55, pp.3, 2019, https://doi.org/10.1007/s11029-019-09820-1
  21. Fem Analysis of Progressive Failure for Composite Hypar Shells vol.52, pp.4, 2020, https://doi.org/10.1007/s11223-020-00202-w