DOI QR코드

DOI QR Code

High precision integration for dynamic structural systems with holonomic constraints

  • Liu, Xiaojian (Department of Civil Engineering, University of Portsmouth) ;
  • Begg, D.W. (Department of Civil Engineering, University of Portsmouth) ;
  • Devane, M.A. (Department of Civil Engineering, University of Portsmouth) ;
  • Zhong, Wanxie (Dalian University of Technology)
  • 발행 : 1997.05.25

초록

This paper presents a high precision integration method for the dynamic response analysis of structures with holonomic constraints. A detail recursive scheme suitable for algebraic and differential equations (ADEs) which incorporates generalized forces is established. The matrix exponential involved in the scheme is calculated precisely using $2^N$ algorithm. The Taylor expansions of the nonlinear term concerned with state variables of the structure and the generalized constraint forces of the ADEs are derived and consequently, their particular integrals are obtained. The accuracy and effectiveness of the present method is demonstrated by two numerical examples, a plane truss with circular slot at its tip point and a slewing flexible cantilever beam which is currently interesting in optimal control of robot manipulators.

키워드

참고문헌

  1. Amirouche, F.M.L. (1992), Computational methods in multibody dynamics, Prentice Hall, Engllewood Cliffs, New Jersey.
  2. Bae, Dae-Sung and Haug, E.J. (1987), "A recursive formulation for constrained mechanical system dynamics: Part I, Open loop systems", Mech. Struct. & Mach., 15, No.3, 359-382 https://doi.org/10.1080/08905458708905124
  3. Barauskas, R. (1994), "Dynamic analysis of structures with unilateral constraints: numerical integration and reduction of structural equations", Int. J. Num. Meth. Eng., 36, No.17, 2895-2919.
  4. Baumgarte, J. (1972), "Stabilization of constrained and integrals of motion in dynamical systems", Comp. Meth. Appl. Mech. Eng., 1, No.1, 1-16. https://doi.org/10.1016/0045-7825(72)90018-7
  5. Golub, G.B. and Loan, C.F. van (1983), Matrix Computation, John Hopkins University Press.
  6. Lambert, J.D. (1973), Computational Methods in Ordinary Differential Equations; John Wiley & Sons Ltd.
  7. Li, Chang-Jin and Sankar, T.S. (1992), "A systematic method of dynamics for flexible robot manipulators", J. Robotic Systems, 9, No.7, 861-891 https://doi.org/10.1002/rob.4620090702
  8. Liu, Y.C. and Yang, S.M. (1993), "Three simple and efficient methods for vibration control of slewing flexible structures", J. Dynamic Systems, Measurement, and Control, 115, No.4, 725-730 https://doi.org/10.1115/1.2899205
  9. Liu, Xiaojian Williams, F.W. and Kennedy, D. (1994), "Contrained substructuring methods for the analysis of dynamic structures", Comp. Meth. Appl. Mech. Eng. (under revision)
  10. Lin, Jiahao, Shen, Weiping and Williams, F.W. (1995), "High precision direct integration scheme for non-stationary random seismic responses of non-classically damped structures", Struc. Engr. and Mechanics, 3, No. 3, 215-228. https://doi.org/10.12989/sem.1995.3.3.215
  11. Liu, Xiaojian and Wu, Gaofeng (1996), "Dominat mode method for the minimum time design of slewing flexible structures", Computers and Structures, 59, No.6, 1073-1082. https://doi.org/10.1016/0045-7949(95)00329-0
  12. Liu, Xiaojian (1996), "Sensitivity analysis of constrained flexible multibody systems with stability considerations", Mech. Mach. Theory, 31, No.7, 859-863. https://doi.org/10.1016/0094-114X(96)00003-1
  13. Nikravesh, P.E. (1984), "Some methods for dynamic analysis of constrained mechanical systems: a survey", Computer Aided Analysis and Optimization of Mechanical System Dynamics, Edited by E.J. Haug, Springer-Verlag, Heidelberg, 351-369
  14. Yang, Shih-Ming (1992), "Modal analysis of structures with holonomic constraints", AIAA Journal, 30, No. 10, 2526-2531. https://doi.org/10.2514/3.11256
  15. Zhong, W. (1993), Computational Structural Mechanics and Optimal Control, Dalian University of Technology Press (in Chinese), Dalian, P.R.China
  16. Zhong, W. and Williams, F.W. (1994), "A precise time step integration method", Proc. Institution of Mechanical Engineers, Part C: J. Mech. Engr. Science, 208, No.6, 427-430. https://doi.org/10.1243/PIME_PROC_1994_208_148_02
  17. Zhong, W. (1994), "The method of precise integraion of finite strip and wave guide problems", Int. Conf. on Computational Methods in Structural and Geotechnical Engineering, Hong kong, Dec.

피인용 문헌

  1. Performance and numerical behavior of the second-order scheme of precise time-step integration for transient dynamic analysis vol.23, pp.6, 2007, https://doi.org/10.1002/num.20221
  2. A second-order scheme for integration of one-dimensional dynamic analysis vol.49, pp.2-3, 2005, https://doi.org/10.1016/j.camwa.2004.08.009
  3. Theoretical Analysis of Human-Structure Interaction on Steel-Concrete Composite Floors vol.146, pp.4, 2020, https://doi.org/10.1061/(asce)em.1943-7889.0001740