A Study on Factors Affecting Airborne Fume Composition and Concentration in Welding Process

용접공정에서 발생된 공기중 흄의 조성과 농도에 영향을 미치는 요인에 관한 연구

  • Shin, Yong Chul (Department of Industrial Hygiene, Industrial Health Research Institute) ;
  • Yi, Gwang Yong (Department of Industrial Hygiene, Industrial Health Research Institute) ;
  • Park, Seung Hyun (Department of Industrial Hygiene, Industrial Health Research Institute) ;
  • Lee, Na Roo (Department of Industrial Hygiene, Industrial Health Research Institute) ;
  • Jeong, Jee Yeon (Department of Industrial Hygiene, Industrial Health Research Institute) ;
  • Park, Jung Keun (Department of Industrial Hygiene, Industrial Health Research Institute) ;
  • Oh, Se Min (Department of Industrial Hygiene, Industrial Health Research Institute) ;
  • Moon, Young Hahn (Department of Industrial Hygiene, Industrial Health Research Institute)
  • Published : 1997.11.13

Abstract

The purpose of this study was to investigate factors affecting the composition and concentrations of fumes generated from various types of welding processes. The results are as follows. 1. Iron(Fe), zinc(Zn) and manganese(Mn) were predominant in Welding fumes. The Fe content in total fumes was 25.5% in coated electrode and 28.2% in $CO_2$ are welding, and the Zn content was 4.5% and 9.1%, respectively, and the Mn was 3.6% and 7.8%, respectively. 2. It was found that the important factors determining composition and concentration of fumes were type of industries, type of welding processes, type and composition of electrodes, composition of base metals, confinement of workplaces or condition of ventilation, work intensity, coated metals such as lead and Zn in paint. 3. The Mn content in airborne fumes was highly correlated with that of electrode(r=0.77, p<0.01) and was about 4 times higher than that in electrodes or base metals. The results lindicate that Mn is well evaporated into air during welding. The higher vapor pressure of Mn may explain this phenomenon. 4. the airborne total fume concentrations were significantly different among types of industries(p<0.001). The airborne total fume concentration was higher in order of sleel-structure manufacturing($GM=15.1mg/m^3$), shipbuilding($GM=13.2mg/m^3$), automobile-component manufacturing ($GM=7.8mg/m^3$) and automobile assembling industry($GM=3.0mg/m^3$) 5. The airbone total fume concentration was 6 times higher in $CO_2$ welding than in coated electrode welding, and approximately 3 times higher in confined area than in open area, in steel-structure manufacturing industry. 6. The concentration of welding fume outside welding helmet was about 2 times higher than that inside it. It is recommened that air sampling be done inside helmet to evaulate worker's exposure accurately, for it has an outstanding effect on reducing worker exposure to fumes and other contaminants.

Keywords