Glycothermal 공정에 의한 미립 ZnO 분말의 제조

Fabrication of the ultrafine ZnO powder through glycothermal process

  • Dong-Sik Bae (Division of Ceramics, Korea Institute of Science and Technology) ;
  • Kyong-Sop Han (Division of Ceramics, Korea Institute of Science and Technology) ;
  • Yong-Kap Park (Department of Materials Science and Engineering Sunmoon University) ;
  • Seung-Beom Cho (Division of Materials Research Center, Rutgers University) ;
  • Sang -Heul Choi (Department of Materials Engineering, Hanyang University)
  • 발행 : 1997.11.01

초록

고순도 ZnO 미분말은 금속 질산염을 수산화 칼슘으로 침전시켜 이를 1,4-부탄에디올속에서 고온고압 반응으로 얻어졌다. 이때 미분말이 얻어진 반응온도는 $225-275^{\circ}C$, 압력은 1-3.0 MPa 이였다. 분말의 미세구조는 주사전자현미경으로 결정상은 X-선회절 분석으로 행하였다. 분말의 물성과 반응온도, 반응시간 및 농도의 관계를 조사하였다. ZnO 분말의 평균입자크기는 반응온도와 시간이 증가함에 따라 증가하고, 입자의 모양은 반응온도가 증가함에 따라 다각형의 모양이 얻어졌다. $225^{\circ}C$에서 8 시간 반응을 행한 경우의 평균입자 크기는 약 150 nm 이고, 입도분포는 균일하였다.

The ZnO powder was prepared under glycothermal conditions by precipitation from metal nitrates with aqueous potassium hydroxide. The fine powder was obtained at temperatures as low as 225 to $275^{\circ}C$, The microstructure and phase of the powder were studied by SEM and XRD. The properties of the ZnO powder were studied as a function of various parameters (reaction temperature, reaction time, solid loading, etc). The average particle size of the ZnO increased with increasing reaction temperature. After glycothermal treatment at $225^{\circ}C$ for 8 h, the average particle size of the ZnO powder was about 150 nm and the particle size distribution was narrow.

키워드