초록
$La_2O_3$가 각각 0, 0.1, 0.3, 0.5, 0.7, 1, 3, 5 mole% 첨가된 $0.05pb(Sn_{0.5}Sb_{0.5})O_3＋0.11PbTiO_30.84PbZroO_3＋0.4Wt%MnO_2$ (이하 0.05PSS -0.11PT-0.84PZ+0.4wt%$MnO_2$)계를, $1250^{\circ}C$에서 $PbZrO_3$를 분위기 분말로 사용하여 성형체 무게의 1/2을 함께 넣고 소결체를 제조하여 그 특성을 분석하였다. 소결체의 밀도는 7.683 g/$\textrm {cm}^3$에서 7.515 g/$\textrm {cm}^3$ 범위였으며, 3 mole% $La_2O_3$를 첨가한 경우 가장 높은 값을 나타내었다. 0에서 5 mole% 범위에서 $La_2O_3$ 첨가량을 증가시킬 때 평균 입경이 9.0 $\mu \textrm{m}$에서 1.3 $\mu\textrm{m}$까지 감소되었다. 결정구조의 경우 $La_2O_3$첨가량을 0에서 1 mole%로 할 때 0.05PSS-0.11 PT-0,84PZ계에서 고용된 상을 형성하였으나 3, 5 mole%로 첨가량을 증가시킴에 따라 제2차 산이 형성되었고, 소결체를 $120^{\circ}C$ 또는 $140^{\circ}C$에서 $5 KV_{DC}$ /mm로 20분간 poling 전후에 $La_2O_3$ 첨가량이 0 에서 3 mlole%까지 증가될수록 1KHz에서의 유전 상수는 증가되었으며, 유전손실은 모든 경우에서 1 % 미만의 값을 나타내었다. $La_2$O$_3$첨가량이 0, 0.5, 1, 3 mole%로 증가됨에 따라 큐리온도가 208$^{\circ}C$, 183$^{\circ}C$, $152^{\circ}C$ 그리고 $127^{\circ}C$로 감소되었다. $La_2O_3$가 증가됨에 따라 대체로 $K_{p}$ 증가되었으며 0.7 mlole%의 $La_2O_3$를 첨가한 소결체를 $140^{\circ}C$에서 poling한 경우 가장 높은 $K_p$값으로 14.5 %를 나타내었다.
The effect of $La_2O_3$ as a dopant on the microstructure structure, crystal structure and electrical properties was studied. $0.05Pb(Sn_{0.5}Sb_{0.5})O_3＋0.11PbTiO_3＋0.84PbZroO_3＋0.4Wt%MnO_2$ (=0.05PSS ＋0.11PT＋0.84PZ+0.4wt%$MnO_2$) systems doped with 0, 0.1, 0.3, 0.5, 0.7, 1, 3, 5 mole% $La_2O_3$ were fabricated and investigated sintering density, crystal structure and micro-structure. The sintered 0.05PSS＋0.11PT＋0.84PZ+0.4wt%$MnO_2$ system doped with $La_2O_3$showed sintering density of the range of 7.683 g/㎤ of 0 mole% doping to 7.815 g/㎤ of 0 mole% doping. The average grain sizes in the range of 0 to 5 mole% $La_2O_3$were decreased from 9.0 $\mu\textrm{m}$ to 1.3 $\mu\textrm{m}$. X-ray diffraction investigation of sintered bodies showed that solid solutions were formed between 0.05PSS＋0.11PT＋0.84PZ+0.4wt%$MnO_2$ system and $La_2O_3$ in the range of 0 to 1 mole% but second phases were formed in case of 3, 5 mole%. Dielectric constants at 1 kHz were increased with 0 to 3 mlole% $La_2O_3$ before and after poling at the condition of 5 $KV_{DC}$/mm at $120^{\circ}C$ or $140^{\circ}C$ during 20 minutes. All Dielectric losses at 1 kHz were less than 1%, Curie temperatures were $208^{\circ}C$, $183^{\circ}C$, $152^{\circ}C$ and $127^{\circ}C$ at 0, 0.5, 1, 3 mole% $La_2O_3$ respectively. The values of $K_p$ were increased from 0 to 3 mole% $La_2O_3$ after poling at condition of 5 $KV_{DC}$mm at the condition of $120^{\circ}C$ or $140^{\circ}C$. The case of 0.7 mole% $La_2O_3$doped 0.05PSS＋0.11PT＋0.84PZ+0.4wt%$MnO_2$ system showed $K_p$ of 14.5% by poling at $140^{\circ}C$ during 20 minutes.
