초록
장애자나 노약자가 이동형의 재활보조 시스템을 조이스틱을 이용하여 직접 조작할 경우, 정상인과 달리 조이스틱 제어시 떨림이나 순간적인 오조작 (예를들면 조이스틱으로 손에서 놓치는 경우)이 자주 발생 하게 된다. 이러한 오조작이 그대로 전달될 경우 이동형 재활 보조시스템의 진동잉나 오동작을 초래하고, 특히 장애자나 노약자의안전성의 측면에서 문제로 대두된다. 따라서 본 연구에서는 이러한 문제점을 해결하기 위하여 장애자의 오조작 및 주위 환경과의 충돌을 방지하기 위하여 초음파 센서를 사용하여 물체와 이동 로봇의 접근 정도를 측정하고 이에 따라 이동 로보트가 물체에 접근하는 것을 방해할 수 있도록 모터부착형 조이스틱에 토오크를 걸어주는 조이스틱을 사용한 힘 반향 주행 기법을 제안하였다. 제안될 힘 반향 기법의 유효성을 입증하기 위하여 원통형의 전방 장애물과 복도의 벽면을 가상으로 만들고 이를 따라 조이스틱을 조작하여 주행실험을 하였으며, 그 결과 조작자의 숙련도의 차이는 있었으나 장애물 정보를 조이스틱을 통하여 조작자에게 전달됨을 확인함으로써 조작성능과 장애물에 대한 안전성이 향상됨을 알수 있었다.
When the disabled is operating a rehabilitation assisting system with a joystick by himself, unlike in the case of a normal person, tremor with joystick control or instant miscontrol can often occur. If these misoperations should be directly relayed to the system, shaking or malfunction of the mobile rehabilitation assisting system might be the result. The safety of the disabled is of prime concern. To solve this problem, that is, to prevent the miscontrol of the disabled operator and avoid crashes into his or her surroundings, we propose the force-reflection locomotion algorithm with the joystick. This method uses ultrasonic sensors to measure the distance between the object and mobile robot. Based on the reception of sensory data, the necessary torque is applied via the joystick to the attatched motor. To confirm the effectiveness of the proposed method, the subjects on the reflected force by the dynamic characteristics of the joystick and the reflected force by the distance information are tested Even though there are some differences in human dexterity, we confirmed the fact that the information from the obstacles was relayed to the operator via the joystick and resulted in an improved operational performance and safety level with regard to those obstacles.