12% Cr강의 고온 확산계수의 응력의존성과 조직의 특성에 관한 연구

A study on the stress dependence of diffusion coefficient at the elevated tenperature and the structural characterictics of 12% Cr rotor steel.

  • 장윤석 (정회원, 경남전문대, 기계설계과) ;
  • 김태형 (동아대학교 생산기술 연구소)
  • 발행 : 1997.05.01

초록

Creep rate the elevated temperature is known to be controller by the softening process of microstructure especially in the solid solution alloys such as 125 Cr rotor steel. The change of structure is a decreasing process of the free energy of the state including stress, diffusivity of the material, and tmeperature. This study shows that diffusion coefficient, D of 12% Cr rotor steel at 953K with 74.8 MPa is 1.084~3.140*$10^{15}mm^2sec^1$ compared to $1.658*10^{24}mm^2sec^1$at 963K without stress. During creep, the growth of martensite laths accelerates the diffusion coefficient under stress due to incoherency of interface between carbides and matrix.

키워드

참고문헌

  1. 한국해양공학회지 v.4 no.2 12%Cr강의 크리이프 중 전위거동에 관한 연구 오세욱;장윤석
  2. Acta Metall. Mater v.30 Formation of Fault Structures during Coalescence and Growth of Gold Particles in a Fused Silica Matrix J.T.McGinn;V.A.Greenhut;B.Lanc.J
  3. Acta Metall. Mater v.41 no.10 Diffusion in Ordered Alloys and Intermetallic Compounds C.C.Wang;S.A.Akbar
  4. Acta Metall. Mater v.40 no.4 A Model for Diffusion along a Moving Grain Boundary Y.M.Mishin
  5. Acta Metallugica v.28 Correlation for Diffusion Constants A.M.Brown;M.F.Ashby
  6. Acta Metall. Meter v.40 no.4 Effective Diffusion Coefficient Involved in the High Temperature Viscoplastic Behavior Law of Cu-Sn(15-20% Sn) G.Some;J.Bernardini;C.Lexcellect
  7. Acta Metallugica v.17 Mechanical Behavior of Polycrystalline Tungsten at Elevated Temperature S.L.Robinson;O.B.Sherby
  8. Acta Metallugica v.22 Development of a Theoretical Equation for Steady State Dislocation J.H. Gittus
  9. Phase Stability in High Temperature Alloys I.V.Guttmann
  10. Theoretical Structural Metallurgy A.H.Cottrell
  11. Acta Metall.Mater v.41 no.11 Hydrogen Diffusion and Permeation in Micro and Nanocrystalline D.R.Arantes;X.Y.Huang;R.Kirchheim
  12. Acta Metallugica v.36 no.7 Diffusion Measurements in the $Fe_82B_18$ Amorphous Alloy S.K.Sharma;S.Banerjee;A.K.Jain
  13. Acta Metallugica v.36 no.3 Bulk Diffusion and Solubility of Silver and Nickel in Lead and Lead-Nickel Solid Solutions H.A.Badrour;G.Moya;J.Bernardini
  14. Acta Metallugica v.36 no.5 Tracer Diffusion in Pure and Boron-Doped Ni3Al K.Hoshino;S.J. Rothman;R.S.Averbark
  15. Acta Metallugica v.34 no.1 Diffusion of Oxgen in Tantalum-Based Alloys J.S,Lee;C.J.Altstetter
  16. Theory of Dislocation P.Hirth;J.Lothe
  17. Trans, Am.Inst, Min. Engrs v.233 R.L.Andelin;J.D.Knight;M.Kahn
  18. Acta Metall.Mater v.40 no.3 Dissociation of Grain Boundaries, The Ejection of Dislocations from Grain Boundaries, and the Nucleation of Diffusion Induced Grain Boundary Migration R.J.Jahn;A.H.King
  19. 한국해양공학회지 v.3 no.2 12%Cr 로우터강의 강도 개선에 관한연구 오세욱;장윤석
  20. Acta Metall.Mater v.40 no.4 Simulation of Thin Film Grain Structures-Abnormal Grain Growth H.J.Frost;C.V.Thomson;D.T.Walton
  21. Elements of Physical Metallurgy A,G.Guy
  22. Acta Metall.Mater v.34 no.1 Grain Growth in a Superplastic Zn-22%Al Alloy O.N.Senkov;M.M.Myshlyaev
  23. Dislocations J.Friedel