Abstract
Super precision resistor was manufactured by controlling properly the thickness of $TaN_{0.1}$ (negative TCR) and Cr(positive TCR) deposited on cylindrical alumina substrate (diameter: 4 mm, length: 11 mm). Multilayer thin film resistor of $Ta_2O_5/TaN_{0.1}$/Cr/Alumina (substrate) was manufactured by depositing of $Ta_2N_5$ film on $TaN_{0.1}$ film to increase Rs to the level of 1;k{\Omega}/{\box}$ and to passivate the film. Super precision resistor with TCR of $20\pm5 ppm/^{\circ}C$ and Rs of $1\;k{\Omega}/{\box}$ was manufactured by depositing thin layers of about 10 nm $Ta_2O_5$, 100 nm $TaN_{0.1}$ and 50 nm Cr film under the properly controlled sputtering condition.
DC Magnetron Sputtering 방법으로 원기둥형 Alumina기판(직경 4mm, 길이 11mm) 상에 부(-)의 TCR특성의 TaN0.1(부도체)와 정(+)의 TCR특성의 Cr(금속)박막두께를 적절히 조절하므로써 초정밀 저항기를 제조하였다. 그리고 면저항(Rs)을 1k$\Omega$/수준으로 높이고 보 호막을 형성키 위하여 상부에 $Ta_2O_5$막을 입형 $Ta_2O_5/TaN_{0.1}/Cr/Al_2O_3$(substrate)의 다층 박 막저항체를 제조하였다. 적절한 조건(기판온도, $N_2$(g), Ar(g)의 유속 등)으로 상기 다층박막 내 각 막의 두께를 약10,100과 500nm두께로 증착했을 때, $Rs\approx 1k\Omega/\Box$와 $TCR\approx 20$\pm 5ppm/^{\circ}C$ 의 초정밀 저항체가 제조되었다.