Computational Structural Engineering (전산구조공학)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지

선체구조의 좌굴.최종강도에 관한 연구동향

  • 백점기 (부산대학교 조선해양공학과)
  • Published : 1997.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

본 고에서는 선체구조의 좌굴 및 최종강도에 관한 연구현황을 조사 분석하고자 한다. 먼저 대표적인 구성부재인 판 및 보강판의 좌굴 최종강도에 관한 연구현황을 분석하고, 다음으로 선각거더의 최종붕괴강도에 관한 연구동향을 분석하고자 한다.

Keywords

References

  1. 熔接變形殘留應力 左藤邦彦;上田幸雄;藤本二南
  2. Analysis of Welded Structures K. Masubushi
  3. 熔接構造便覽 左藤邦彦
  4. Report of Committee Ⅲ.1 International Ship and Offshore Structures Congress v.1 Ductule Collapse J.J. Jensen(et al.)
  5. 有限要素法ハンドブック(Ⅰ基礎編) 鷲津久一郞(外)
  6. 有限要素法ハンドブック(Ⅱ應用編) 鷲津久一郞(外)
  7. Report of Committee Ⅴ.1 International Ship and Offshore Structures Congress v.2 Applied Design-Strength Limit States Formulations T. Moan(et al.)
  8. Buckling Strength of Metal Structures F. Bleich
  9. Theory of Elastic Stability S.P. Timoshenko;J.M. Gere
  10. Ship Structural Design, A Rationally-Based, Computer-Aided, Optimization Approach O.F. Hughes
  11. International Shipbuilding Progress v.23 no.268 The Influence of the Torsional Rigidity of Plate Stiffeners on Plate Effectiveness D.G. Williams
  12. J. of the Society of Naval Architects of Japan v.174 A New Plate Buckling Design Formula (3rd Report)-On the Real Edge Condition J.K. Paik;J.Y. Kim;W.S. Kim;Y.S. Chung
  13. Buckling of Offshore Structures, A State-of-the-Art Review C.P. Ellinas;W.J. Supple;A.C. Walker
  14. Technical and Research Bulletin, No. 2-22, The Society of Naval Architects and Marine Engineers Charts for the Buckling and Post-Buckling Analyses of Stiffened Plates under Combined Loading A.E. Mansour
  15. 日本造船學會論文集 v.157 矩形板の彈性座屈相關關係式 上田幸雄;S.M.H. Rashed;白点基
  16. J. fo the Society of Naval Architects of Japan v.171 A New Plate Buckling Design Formula J.K. Paik;J.H. Ham;U.N. Kim
  17. J. of the Society of Naval Architects of Japan v.172 A New Plate Buckling Design Formula (2nd Report) - On the Plasticity Correction J.K. Paik;J.H. Ham;J.H. Ko
  18. Transactions of the American Society of Mechanical Engineers v.54 no.5 Strength of Thin Plates in Compression T. von Karman;E.E. Sechler;L.H. Donnell
  19. J. of Ship Research v.19 no.1 A Review of Effective Plating for Use in the Analysis of Stiffened Plating in Bending and Compression D. Faulkner
  20. Developments in ThinWalled Structures Effective Widths in Plate Buckling J. Rhodes;J. Rhodes(Ed.);A.C. Walker(Ed.)
  21. 日本造船學會論文集 v.159 大たわみを伴う矩形板の組合せ荷重に對する有校幅 上田幸雄;S.M.H. Rashed;白点基
  22. 대한조선학회논문집 v.28 no.1 2축압축력을 받는 단순지지평판에 대한 비선형거동의 해석해 백점기
  23. J. of Structural Engineering v.119 no.5 Effective Width of Locally Buckled Plates in Compression and Bending T. Usami
  24. Transactions of the Royal Institution of Naval Architects v.129 Strength and Stiffness of Ships` Plating Under In-Plane Compression and Tension C.S. Smith;P.C. Davidson;J.C. Chapman;P.J. Dowling
  25. 日本造船學會論文集 v.158 組合せ應力下での長方形板の最終强度(その2) 大坪英臣;吉田二郞
  26. 日本造船學會論文集 v.145 組合せ荷重を受ける平板の最終强度(第1報) -壓縮と剪斷を受ける正方形板 藤田 讓;野本敏治;仁保 治
  27. 日本造船學會論文集 v.156 組合せ荷重を受ける矩形板および防撓板の座屈および最終强度の 相關關係(第1報) -2軸方と剪斷を受ける場合 上田幸雄;S.M.H. Rashed;白点基
  28. Transactions of the Royal Intitution of Naval Architects v.132 The Design of Plate Panels Subjected to In-Plane Shear and Biaxial Compression of Naval Architects P.C. Davidson;J.C. Chapman;C.S. Smith;P.J. Dowling
  29. Transactions of the Royal Institution of Naval Architects v.133 The Design of Plate Panels Subject to Biaxial Compression and Lateral Pressure P.C. Davidson;J.C. Chapman;C.S. Smith;P.J. Dowling
  30. TAPIR Ultimate Load Analysis of Marine Structures T.H. Soreide
  31. The Strutural Engineer v.47 Welded Steel Plates in Compression J.B. Dwight;K.E. Moxham
  32. Transactions of the Royal Institution of Naval Architects v.117 Compressive Strength of Welded Steel Ship Grillage C.S. Smith
  33. The Structural Engineer v.58B no.3 The Collapse of Rectangular Steel Plates under Uniaxial Compression G.H. Little
  34. Marine Structures v.6 Simulation of the Ultimate Compressive Strength ofUnstiffened Rectangular Plates C. Guedes Soares;M. Kmiecik
  35. J. of Ship Research v.39 no.3 Ultimate and Crsuhing Strength of Plated Structures J.K. Paik;P.T. Pedersen
  36. Internation Shipbulding Progress v.43 no.434 A Simplified Method for Predicting the Ultimate Compressive Strength of Ship Panels J.K. Paik;P.T. Pedersen
  37. J. of Ship Research v.39 no.1 A New Concept of the Effective Shear Modulus for a Plate Buckled in Shear J.K. Paik
  38. Ship Structure Committee, Report No. SSC-354 Strutural Redundancy for Continous and Discrete Systems P.K. Das;J.F. Garside
  39. Ship Structure Committee, Report No. SSC-375 Uncertainty in Strength Models for Marine Structures O.F. Hughes;E. Nikolaidis;B. Ayyub;G. White;P. Hess
  40. Proc. of the 6th Int. Symp. on Practical Design of Ships and Mobile Units (PRADS`95) v.2 Benchmarking of Ultimate Strength Prediction for Longitudinally Stiffened Panels P. Rigo;T. Moan;P.A. Frieze;M. Chryssanthopoulos
  41. Joint PNU-ABS Research Project, Final Report to the American Bureau of Shipping, by Pusan National University A Benchmark Study of the Ultimate Strength Formulations of Stiffened Pamels J.K. Paik
  42. Constructional Steel Design, An International Guide Box Girders P.J. Dowling;J.E. Harding;P.J. Dowling(Ed.);J.E. Harding(Ed.);R. Bjorhoved(Ed.)
  43. Proc. of Int. Conf. on Steel and Aluminum Structures Towards a Better Understanding of Compression Induced Stiffener Tripping D. Faulkner;R. Narayanan(Ed.)
  44. Marine Structures v.1 Interactive Flexural-Torsional Buckling Behavior of Stiffened Plating P.A. Caridis
  45. Marne Structures v.5 Ultimate Torsional Strength of Flar-Bar Stiffeners Attached to Falt Plating under Axial compression G.D. Panagiotopoulos
  46. J. of Constructional Steel Research v.38 no.1 Local Buckling of Stiffened Plates in Offshore Structures N.E. Shanmugam;M. Arockiasamy
  47. J. of Ship Research Local Buckling of Stiffeners on Ship Plating J.K. Paik;Y.I. Park;A.K. Thayamballi
  48. J. of Structural Engineering v.122 no.6 Ultimate Compressive Strength of Orthogonally Stiffened Steel Plates I. Mikami;K. Niwa
  49. Fritz Laboratory Report No. 248.13 Ultimate Strength of Longitudinally Stiffened Plate Panels Subjected to Combined Axial and Lateral Loading J. Kondo
  50. Marine Structures v.8 Buckling and Ultimate Strength Interaction of Plates and Stiffened Plates under Combined Inplane Biaxial and Shearing Y. Ueda;S.M.H. Rashed;J.K. Paik
  51. J. of Structural Division v.103 no.ST11 Design of Axially Loaded Stiffened Plates M.R. Horne;R. Narayanan
  52. Proc. of Inst. of Civil Engrs. v.63 Influence on Strength of Compression Panels of Stiffener Section, Spacing and Welded Connection M.R. Horne;P. Montague;R. Narayanan
  53. Steel Plated Structures Compression Tests on Welded Eccentrically Stiffened Plate Panels D. Faulkner;P.J. Dowling(ed.)(et al.)
  54. J. of Constructional Steel Research v.28 Experimental Study of Stiffened Plates in Compression up to Collapse K. Ghavami
  55. 대한조선학회 논문집 v.33 no.3 판 및 보강판의 압축최종강도 실험식 백점기;이제명
  56. Transactions of the Society of Naval Architects and Marine Engineers v.91 Ultimate Strength of Ship Structures Y.K. Chen;L.M. Kutt;C.M. Piaszczyk;B.P. Bieniek
  57. Transactions of the Society of Naval Architects and Marine Engineers v.93 Evaluation of the Longitudinal Ultimate Strength of various Ship Hull Configurations L.M. Kutt;C.M. Piaszczyk;Y.K. Chen;D. Liu
  58. Proc. Marine Structural Inspection, Maintenance, and Monitoring Symposium Ultimate Hull Girder Strength Margins in Present Class Requirements S. Valsgaard;E. Steen
  59. Proc. of Int. Symp. on Practical Design in Shipbuilding Influence of Local Compressive Failure of Ultimate Longitudinal Strength of a Ship`s Hull C.S. Smith
  60. J. of the Society of Naval Architects of Japan v.170 Progressive Collapse Analysis of a Ship's Hull under Longitudinal Bending T. Yao;P.I. Nikolov
  61. Proc. SNAME Spring Meeting Hull Girder Response to Extreme Bending Moments D.W. Billingsley
  62. Proc. SSC/SNAME sym. on Extreme Loads Response Evaluation of Ultimate Ship Hull Strength R.S. Dow;R.C. Hugill;J.D. Clarke;C.S. Smith
  63. DTNSRDC Report 82/076 ULSTR: A Program for Estimating the Collapse Moment of a Ship`s Hull under Longitudinal Bending J.C. Adamchak
  64. Transactions of the Society of Naval Architects and Marine Engineers v.98 Ultimate Longitudinal Strength of Ships: A Case Study S.E. Rutherford;J.B. Caldwell
  65. J. of Ship Research v.40 no.1 Approximate Assessment of the Ultimate Longitudinal Strength of the Hull Girder J.M. Gordo;C. Gruedes Soares;D. Faulkner
  66. J. of Ship Research v.40 no.3 Estimation of Ultimate Longitudinal Bending Moment of Ships and Box Girders M.K. Rahman;M. Chowdhury
  67. PhD. Thesis, Department of Naval Architecture and Offshore Engineering, Technical University of Denmark Reliability Methods for the Longitudinal Strength of Ships A.M. Hansen
  68. Proc. of Int. Symp. on Practical Ships and Mobile Units(PRADS`95) Collapse of Ship Hulls under Combined Vertical and Horizontal Bending Moments J.M. Gordo;C. Guedes Soares
  69. J. of the Society of Naval Architects of Japan v.172 Progressive Collapse Analysis of a Ship`s Hull under Longitudinal Bending (2nd Report) T. Yao;P.I. Nikolov
  70. J. of the Society of Naval Architects of Japan v.156 Plate and Stiffened Plate Units of the Idealized Structural Unit Method (1st Report) Y. Ueda;S.M.H. Rashed;J.K. Paik
  71. J. of the Society of Naval Architects of Japan v.160 Plate and Stiffened Plate Units of the Idealized Structural Unit Method (2nd Reprot) Y. Ueda;S.M.H. Rashed;J.K. Paik
  72. PhD. Thesis. Department of Ocean Engineering, Technical Unuversity of Denmark Hull Girder Collapse E. Bendiksen
  73. Marine Structures v.6 Collapse Analysis of Ship Hulls Y. Bai;E. Bendiksen;P.T. Pedersen
  74. J. of Ship Research v.38 no.3 Tensile Behavior of Local Members on Ship Hull Collapse J.K. Paik
  75. Proc. RINA Spring Meeting Structural Design by Analysis Approach Applied to Product Oil Carrier with Unidirectional Girder System T. Hori;M. Sekihama;S.M.H. Rashed
  76. J. of the Society of Naval Architects of Japan v.169 Ultimate Longitudinal Strength-Based Safety and Reliability Assessment of Ship`s Hull Girder (2nd Report)-Stiffened Hull Structure- J.K. Paik
  77. Proc. of the Int. Symp. on Practical Design of Ships and Mobile Units (PRASDS`95) Ultimate Strength of Ships under Combined Vertical and Horizontal Moments A.E. Mansour;Y.H. Lin;J.K. Paik
  78. Transactions of the Society of Naval Architects and Marine Engineers v.104 Ultimate Strength of Ship Hulls unde Combined Vertical Bending, Horizontal Bending, and Shearing Forces J.K. Paik;A.K. Thayamballi;J.S. Che
  79. International Shipbuilding Progress v.36 no.408 An Assesment of the Structural Capacity of Damaged Ships: The Plastic Approach in Longitudinal Unsymmetrical Bending and the Influence of Buckling M. Maestro;A. Marino
  80. Proc. of Int. Conf. on Steel Box Girder Bridges Experimental and Predicted Collapse Behaviour of Rectangular Steel Box Girders P.J. Dowling;S. Chatterjee;P.A. Frieze;F.M. Moolani
  81. Int. Congress on Steel Plated Structures The Effect of Shear Lag on the Ultimate Strength Box Girders P.J. Dowling;F.M. Moolani;P.A. Frieze
  82. J. of the Society of Naval Architects of Japan v.154 Analysis of Ultimate Strength of Stiffened Rectangular Plates S. Nishihara
  83. Proc. of SSC/SNAME Symp. on Extreme Loads Response Strength of Ship Hull Girders under Moment Shear and Torque A. Ostapenko
  84. Transactions of the Society of Naval Architects and Marine Engineers v.98 An Experimental Investigation on Ship Hull Ultimate Strength A.E. Mansour;J.M. Yang;A.K. Thayamballi
  85. Proc. of Int. Conf. on Advamces in Marine Structures Testing and Analysis of a 1/3-Scale Welded Steel Frigate Model R.S. Dow;C.S. Smith(Ed.);R.S. Dow(Ed.)
  86. Transactions of the Royal Institution of Naval Architects v.107 Ultimate Longitudinal Strength J.B. Caldwell
  87. Transactions of the Royal Institution of Naval Architects v.115 On Applying the Statistical Approach to Extreme Sea Loads and Ship Hull Strength A.E. Mansour;D. Faulker
  88. Proc. of Int. Conf. on Advances in Marine Structures, Admiralty Research Establishment Development of Ship Strength Formulations A.C. Viner
  89. Thransactions of the Royal Institution of Naval Architects v.121 Toward a Unified Approach to Ship Structural Safety D. Faulkner;J.A. Sadden
  90. Proc. of Marine Sturctural Inspection, Maintenance, and Monitoring Symposium Ship Longitudinal Strength Modeling for Reliability Analysis P.A. Frieze;Y.T. Lin
  91. J. of Marine Science and Technology v.1 no.1 A Simple Formulation for Predicting the Ultimate Strength of Ships J.K. Paik;A.E. Mansour
  92. Transactions of the Royal Institution of Naval Architects v.139 Ultimate Strength Reliability of Corroded Ship Hulls J.K. Paik;S.K. Kim;S.H. Yang;A.K. Thayamballi
  93. J. of Ship Research Ultimate Hull Girder Strength Reliability of Corroded Bulk Carriers J.K. Paik;S.K. Kim;S.K. Lee;A.K. Thayamballi
  94. Ship Structure Committee, Report No. SSC-381 Residual Strength of Damaged Marine Structures D.J. Ghose;N.S. Nappi;C.J. Wiernicki
  95. Ship Structure Committee, Report No. SSC-299 Ultimate Strength of a Ship`s Hull Girder in Plastic and Buckling Modes A.E. Mansour
  96. 日本造船學會論文集 no.160 矩形および防撓板の理想化構造要素の開發 -初期たわみと熔接 殘留應力お有し, 面內荷重と橫荷重を受ける場合 上田幸雄;S.M.H. Rashed;白点基
  97. 西部造船會會報 no.93 組み合せ面內荷重を受ける矩型板の座屈 最終强度に關する硏究 藤久保昌彦;矢尾哲也;B. Varghese
  98. 西部造船會會報 no.93 表層超細粒鋼板座屈 塑性崩壞强度特性關一考察 山本元道;矢尾哲也(他)
  99. 日本造船學會論文集 no.154 熔接初期不整を有する矩型板の壓壞强度に關する硏究(第3報) -複雜な初期たわみを有する矩型板の壓壞强度の推定法 上田幸雄;矢尾哲也;中長啓治;田中義照;半田和久
  100. 東京大學 工學博士論文 板構造物の最終强度に關する硏究 仁保治
  101. 大阪大學 工學博士學位論文 船體構造部材の壓壞强度に關する硏究 矢尾哲也
  102. 大阪大學 工學博士學位論文 壓縮力を受ける鋼板および補强板の極限强度に關する硏究 北田俊行
  103. 日本造船學會論文集 no.175 防撓パネルの壓壞擧動に關する硏究(第1報) 矢尾哲也;藤久保昌彦;柳原大輔;大野禎久
  104. 日本造船學會論文集 no.164 防撓材の局部座屈を伴う防撓板の壓縮强度 田中義照;遠藤久芳
  105. Transactions of the Society of Naval Architects and Marine Engineers v.100 Deterministic and Probabilistic Safety Evaluation for a New Double-Hull Tanker with Transverseless System J.K. Paik;D.H. Kim;H.S. Bong;M.S. Kim;S.K. Han
  106. Transactions of the Royal Institution of Naval Architects v.136 Hull Collapse of an Aging Bulk Carrier under Combined Longitudinal Bending and Shearing Force J.K. Paik