Measurement of Motion Accuracy by Two-dimensional Probe on NC Machine Tools -2nd Report, Measurement of the Linear Motion Accuracy-

2차원 프로브에 의한 NC공작기계의 운동 정밀도 측정 -제2보 직선운동 정밀도 측정-

  • JEON, Eon Chan ;
  • OYAMADA, Shigenori ;
  • TSUTSUMI, MasaomiKAKUTA, Junichro
  • 전언찬 (동아대학교 공과대학 기계공학과) ;
  • 소산전중덕 (주식회사 Kubota) ;
  • 제정신각전윤일랑 (동경농공대학 공학부 기계SYSTEM 공학과Nisshinbo mechatronics 사업본부)
  • Published : 1997.07.01

Abstract

This paper presented a linear motion accuracy by using two-dimensional probe with the master block and the square for NC machine tools. This measuring system could be measured motion error due to numerical control system. The results of measurement and simulation for motion error were similar, and so, this system had enough accuracy to measure a linear motion accuracy for NC machine tools. The experimental results are as follows. 1. This measuring system could be measured motion error due to mumerical control system. 2. The results of measurement and simulation for motion error were similar. 3. This measuring system had enough accuracy to measure a linear motion accuracy for NC machine tools.

Keywords