Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Effect of Preparation Methods of a Matrix Retaining Electrolyte on the Characteristics of a Phosphoric Acid Fuel Cell

인산형 연료전지(PAFC)용 전해질 매트릭스의 제조방법이 전극/매트릭스 계면특성에 미치는 영향

  • 윤기현 (연세대학교 세라믹공학과) ;
  • 최재열 (연세대학교 세라믹공학과) ;
  • 장재혁 (연세대학교 세라믹공학과) ;
  • 김창수 (한국에너지기술연구소)
  • Published : 1997.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The matrices which consisted of SiC whisker, PES(polyesterasulfone) as a binder, span 80(sorbitan monooleate) as a surfactant, TPP(triphenyl phosphate) as a plasticizer and dichloromethane as a solvent, have been prepared by the various methods such as tape casting, rolling, tape cast-coating and roll-coating method. The fuel cells of single stack type using these matrices are characterized by ac impedance spectroscopy and cyclic voltammetry technique. A fuel cell using a matrix prepared by the tape cast-coating method shows the best performance of 466.34 mA/$\textrm{cm}^2$ at 0.6V because it has the lowest polarization resistance at the interface between electrodes and a matrix due to the largest three phase contact region of gases, catalyst and electrolyte.

Keywords

References

  1. Fuel Cell Systems Leo J.M;J. Blomen;M.N. Mugerwa
  2. J. Electrochem. Soc v.106 no.12 The Fuel Cell and the Carnot Cycle H.A. Liebhafsky
  3. Energy v.14 no.12 Electrical characterization of a 2.5 kW Phosphoric acid fuel Cell stack Operating on Simulated Reformed Biogas A. Ascoli;J.D. Pandya;G. Redaelli
  4. Fuel Cell Handbook A.J. Appleby;F.R. Foulkes
  5. J. Electrochem. Soc v.110 no.3 Electrolytes for low Temperature Fuel Cells K.R. Williams;D.P. Gregory
  6. Fuel Cells A. Mcdougall
  7. J. Electrochem. Soc v.136 no.7 Characterization of the Three-phase Equilibrium on a Porous Electrode for Fuel cell M. Sakaguchi;M. Ohta
  8. U.S. Patent 4,661,423 Fuel Cell Electrolyte Matrix and Method for Manufacturing the Same M. Ueno;T. Shirogami;N. Segawa
  9. U.S. Patent 4,173,662 Process for Forming a Fuel Cell Matirx R.C. Stewart, Jr.
  10. U.S. Patent 4,517,260 Single Component Cell for Phosphoric Acid Type Fuel Cell K. Mitsuda
  11. U.S. Patent 4,017,664 Silicon Carbide Electrolyte Retaining Matrix for Fuel Cells R.D. Breault
  12. U.S. Patent 4,695,518 Silicon Carbide Matrix for Fuel Cells J.C.Trocciola;J. Powers;R.G. Martin
  13. U.S. Patent 4,603,060 Method of Manufacturing an Electrode for a Fuel Cell K. Mitsuda;I. Hirata;H. Miyoshi;K. Kitazaki
  14. J. Mater. Sci v.31 Modeling of an Electrolyte Matrix for a Phosphoric Acid Fuel Cell K.H. Yoon;J.H. Huh;J.H. Jang;C.S. Kim;E.S. Kim
  15. 한국요업학회지 v.32 no.2 복소임피던스법에 의한 인산형 연료전지용 전해질 매트릭스 특성 윤기현;장재혁;허재호;김창수;김태희
  16. 한국재료학회지 PAFC용 전해질 매트릭스의 표면 평탄화 처리가 전지 특성에 미치는 영향 윤기현;홍성하;장재혁;김창수
  17. Electrochimica Acta v.33 no.3 Electrochemical Recuction of Oxygen on Small Platinum Particles Supported on Carbon in Concentrated Phosphoric Acid T. Maoka
  18. J. Electrochem. Soc v.142 no.4 Real Active Sufrace area Determination by Adsorption/desorption of Over-potential Deposited Hydrogen J.C.K. Ho;D.L. Piron
  19. Electrochimica Acta v.35 no.10 Impedance Studies of Porous Electrodes I.D. Raistrick
  20. Electrochimica Acta v.22 Gas diffusion and Electrolyte Penetration in Porous gas Diffusion Electrodes W.M. Vogel;K.A. Klinedinst