한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제34권2호
  • /
  • Pages.115-122
  • /
  • 1997
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지

에멀젼 건조법에 의한 Bi-2223 초전도 분말과 테이프 제조

The Preparation of Bi-2223 Superconducting Powder and Tape by Emulsion Drying Method

  • 장중철 (한양대학교 무기재료공학과) ;
  • 이응상 (한양대학교 무기재료공학과) ;
  • 이희균 (한국 원자력 연구소 초전도 연구실) ;
  • 홍계원 (한국 원자력 연구소 초전도 연구실)
  • 발행 : 1997.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

액상 분말 합성법 중의 하나인 에멀젼 건조 방법에 의한 분말 합성은 조성 조절이 용이하고 균질한 미립자 분말을 제조할 수 있는 장점을 지니고 있다. 에멀젼 건조법을 사용하여 합성 분체의 초기 형상과 입도를 제어하고 근본적으로 더욱 개선된 homogeneity를 얻었다. 에멀젼의 분리를 억제시킬 수 있는 계면활성제, 오일상 및 수용액의 혼합비를 조절함으로써 Bi(Pb)-Sr-Ca-Cu-O 초전도 분말을 제조할 수 있었다. 이 방법에 의하여 합성된 산화물 초전도체 분말의 특성 및 pellet으로 성형한 시편을 열처리하여 미세구조와 전기적 특성을 조사하였다. 또한, OPIT(Oxide Powder-in-tube)법에 의해 테이프를 제작하여 미세구조와 전기적 특성을 관찰하였다. 합성된 분말의 입자크기는 1$\mu$m이하의 구형이었으나 대부분이 2~5$\mu$m크기로 응집되어 있었다. Ar분위기의 1/13atm 산소분압(Po2)에서 84$0^{\circ}C$로 72시간 동안 열처리한 덩어리형 시편의 임계저항온도는 108K이었으며, 1차와 2차 열처리한 테이프의 임계전류는 각각 0.4A와 1.5A이었다.

The powder preparation by using emulsion drying method, one of the chemical powder fabrication methods has the advantages; easy to control the chemical stoichiometry and to fabricate homogeneously fine particles. In the present study, the initial morphology and size distribution of the powder fabricated by using emulsion dry-ing method were controlled and were improved the homogeneity. By carefully controlling the mixing ratio of oil phase and aqueous solution and surfactant of preventing emulsion separation, the Bi(Pb)-Sr-Ca-Cu-O su-perconducting powders were prepared. The properties of the superconducting powder fabricated by this method and the microstructures and superconducting properties of the pelletized samples were investigated. The microstructures and electric properties of the tapes prepared by oxide powder-in-tube method were in-vestigated. The fabricated powder was spherical with less than 1$\mu$m but most of them was agglomerated with 2~5$\mu$m in size. The critical temperature of the pelletized sample annealed at 84$0^{\circ}C$ for 72 hours in oxygen par-tial pressure of 1/13atm in Ar atmosphere was 108K. And the critical current of the first and second annealed tapes in air prepared by oxide powder-in-tube process were 0.4A and 1.5A, respectively.

키워드

참고문헌

  1. Jpn. J. Appl. Phys. Lett. v.27 no.2 A New high-Tc oxide superconductor without a rare earth element H. Maeda;Y. Tanaka;M. Fukatomi;T. Asano
  2. Cryogenics v.33 no.3 Bismuth superconducting wires and their applications K. Sato;N. Shibuta;H. Nukai;T. Hikata;M. ueyama;T. Kato;J. Fujikame
  3. Supercond. Sci. Technol. v.6 no.197 Ag sheath Bi(Pb)SrCaCuO superconducting tapes S. X. Dou;H. K. Liu
  4. Physica C. v.194 no.343 Magnetic properties and microstructures in Ag-clad Bi-Pb-Sr-Ca-Cu-O wires S. X. Dou;Y. C. Guo;H. K. Liu
  5. Supercond. Sci. Technol v.8 no.827 Optimization of the preparation parameters of monofilamentary Bi(2223) tapes and the effcet of the rolling pressure on Jc. G. Grasso;A. Teremie;R. Flukiger
  6. Philosophical Magazine A The bulk processing of 2223 BSCCO powders ; Part Ⅱ Tape Rolling S. E. Schenfeld;R J Asaro;S. Arzi
  7. The effect of initial packing density of OPIT method on the phase formation, electrical transport and mechanical properties of Bi-(Pb)-Sr-Ca-Cu-O monocore superconducting tapes N. V. Vo;S. X. Dou;H K. Liu
  8. Supercond. Sci. Technol. v.8 no.94 Nanophase precursors for high-Jc Ac-clad superconducting Bi(Pb)SrCaCuO tapes L. N. Wong;I. V. Zakharchenko;M. Muhammed;J. H. Zu;A. M. Grishin;K. V. Rao;V. Balanchandran
  9. Physica C. v.181 no.201 $Pb_{0.3}Bi_{1.7}CaXSr_{4-x}$Cu₃$O_Y$ and $Pb_{0.4}Bi_{1.6}Ca_xSr_{4-x}$Cu₃$O_Y$ super-conductors from coprecipitated oxalate precursors G. Gritzner;K. Bernhadr
  10. Appl. Phys. Lett. v.62 no.7 Preparation of Bi-Pb-Sr-Ca-Cu-O oxide super -conductors by coprecipitation of nanosize oxalate precursors powders in the aqueous core of water-in-oil microemulsions P. Kumar;V. Pillai;D. O. Shah
  11. KAIST박사학위논문 Emulsion drying법에 의한 고온초전도체의 분말제조와 (Bi,Pb)Sr₂Ca₂Cu₃$O_x$계의 산소 거동에 관한 연구 엄우식
  12. J. Am. Ceram. Soc. v.72 no.6 Rapid formation of the 110K phase in Bi-Pb-Sr-Ca-Cu-O through freeze-drying powder processing K. H. Song;H. K Liu;S. X. Dou;C. C. Sorrell
  13. J. Mater. Res. v.9 no.10 Synthesis, processing behavior, and characterization of bismuth superconductors using freeze dried nitrate precursors N. V. Coppa;W. S. Hultz;J. L. Smith;J. Brynestad
  14. Jpn. J. Appl. Phys. v.28 no.7 Direct preparation of fine powders of the 80K superconducting phase in the Bi-Pb-Sr-Ca-Cu-O system by spray pyrolysis N. Tohge;M. Ttsumisago;T. Minami;K. Okuyama;K. Arai;Y. Kousaka
  15. J. Mater. Res. v.8 no.6 Solution-based synthesis route to ($Bi_{1-x}Pb_x$)Sr₂Ca₂Cu₃$O_{10+δ}$ M. T. Ruiz;F. A Badia;J. Blasco;R. Navaro
  16. J. Mater. Soc. v.26 no.4427 Transport characteristics related with microstructure of (Bi,Pb)-Sr-Ca-Cu-O superconductors prepared by the sol-gel method A. Nozwe;H. Nasu;K. Kamiya;K. Tanaka
  17. High Temperature Superconducting Materials Science and Engineering Processing Bi-based high-Tc superconducting tapes, wires and thick films for conductor applications E. E. Hellstrom;Donglu Shi(ed.)
  18. Meterials Reseach Society Symposia Proceeding v.73 Preparation of ceramic powder from cmulsions M. Akine;K. Richardson;C.J. Brinker(ed.);D.E. Clark(ed.);D.R. Ulrich(ed.)
  19. Ceram. International. v.13 no.253 Preraration of Y₂O₃from emulsion evaporation K. Richadson;M. Akinc
  20. Jpn. J. Appl. Phys. v.27 no.10 Preparation of single 110K phase of the Bi-Pb-Sr-Ca-Cu-O superconductor S. Koyama;U. Endo;T. Kawai
  21. Physica C v.254 no.342 Mechanisms and kinetics of the synthesis of BSCCO superconducting phases via organometallic precursors A.Tampieri;E. Landi;G. Celotti
  22. Am. Ceram. Soc. Bull. v.71 no.8 Phase formation of high Tc superconducting oxides in the Bi-Pb-Sr-Ca-Cu-O glass W. Wong-Ng;C. Chiang;S W. Freiman;L. P. Cook;M. D. Hill
  23. J. Am. Ceram. Soc. v.75 no.3 Compact swelling in $Bi_{1.4}Pb_{0.6}$Sr₂Ca₂$Cu_{3.6}O_y$ during the formation of high-Tc superconducting phase C. J. Kim;S J Kang;D. Y. Won