한국섬유공학회지 (Textile Science and Engineering)

  • 제34권6호
  • /
  • Pages.337-342
  • /
  • 1997
  • /
  • 1225-1089(pISSN)
  • /
  • 2288-6419(eISSN)
한국섬유공학회 (The Korean Fiber Society)
권호 표지

셀룰로오스 아세테이트로 표면화학개질된 PAN 섬유의 특성

Effect of Surface Chemical Modification with Cellulose Acetate on Properties of PAN Fiber

  • 김진우 (창원대학교 공업화학과) ;
  • 이상민 (창원대학교 공업화학과) ;
  • 오영세 (한일합섬(주) 기술연구소)
  • Kim, Jin-U (Department. of Chemecal Technology, Changwon National University) ;
  • Lee, Sang-Min (Department. of Chemecal Technology, Changwon National University) ;
  • O, Yeong-Se (R & D Center, Hanil Synthetic Fiber, Co. Ltd.)
  • 발행 : 1997.06.01

⟨ 이전 논문 다음 논문 ⟩

초록

The fibers containing primary amino groups were prepared by reacting PAN fiber with ethylene diamine (EDA). This aminated PAN fibers was finally modified with cellulose acetate (CA) in the presence of hexamethylene diisocyanate (HDI) as binder The amine content of PAN fibers was 0.012∼0.327 meq/g, and the maximum amice content of PAN fibers was obtained after 18 hrs of amination. The finally modified PAN fibers contained less than leyc of CA. The storage modulus of final PAN fiber in glassy state was decreased, but increased in rubbery state after modification. As EDA and CA was introduced Into PAN fibers, Tg's were slightly shifted to lower temperature. In the SEM micrographs the surface of aminated PAN fibers became coarse, but the surface of the final PAN fibers containing CA did smoother than that of original fiber. The modification enhanced the Young's modulus of PAN fiber. While the aminated PAN fiber showed stress-hardening behavior at large deformation, the final PAN fiber modified with CA did low yield behavior as well as thermoplastic deformation.

키워드

참고문헌

  1. Text. Prog. v.8 D. J. Poyton
  2. J. Appl. Polym. Sci. v.30 P. I. Dalven;J. R. Hilderbandt;A. T. Laccetti;L. T. Hongins;H. P. Gregor
  3. J. Polym. Phys. Ed. v.21 A. K. Gupta;R. P. Songhal
  4. Text. Res. J. v.50 P. Bajaj;A. K. Sengupta;P. C. Jain
  5. Seni Gakkaishi v.32 no.1 T. N. Nakajima;H. Katano;E. Isobe
  6. J. Appl. Polym. Sci. v.26 W. A. Smith;J. W. Barlow;D. R. Paul
  7. Eur. Polym. J. v.27 S. E. M. El-Begawy;M. B. Huglin
  8. Kobunshi Ronbunshu v.36 no.7 R. Endo;H. Okano;A. Goto
  9. Kogyo Kagaku Zasshi v.72 M. Shimamura;Y. Nakushina
  10. J. Macromol. Sci.-Phys. v.B33 Y. S. Oh;Y. M. Lee;B. K. Kim
  11. Text. Res. J. M. A. Siahkolah;W. K. Walsh
  12. Text. Res. J. v.33 G. K. Morbey;J. C. Whiwell
  13. J. Appl. Polym. Sci. v.25 P. Aptel;I. Cabasso
  14. Coating and Plastic Chem. Preper. v.5 I. Cabasso
  15. J. Polym. Sci. v.20 D. M. Cates;H. J. White
  16. J. Polym. Sci. v.20 D. M. Cares;H. J. White
  17. J. Macromol. Sci. Phys.(in press) Y. S. Oh;B. K. Kim
  18. J. Appl. Polym. Sci. v.16 L. H. Peebles;R. B. Thompson;J. R. Kirby;M. E. Gibson
  19. U. S. Patent 3,636,187 T. Ohfuka;H. Sato;K. sagara
  20. Materials Sci. Eng. v.17 P. J. Goodhew;A. J. Clarke;J. E. Balley
  21. J. Appl. Polym. Sci. v.23 A. S. Kenyon;McC. J. Rayford