한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제6권1호
  • /
  • Pages.34-44
  • /
  • 1997
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

RCB법에 의한 원통형 플런지 연삭공정의 싸이클 시간 감소에 관한 연구

A Study on the Cycle Time Reduction of Cylindrical Plunge Grinding Process with Recursive Constraint Bounding Method

  • 최성주 (한국기술교육대학교 생산기계공학과)
  • 발행 : 1997.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study presents the recursive constraint bounding(RCB) method to reduce the cycle time in internal cylindrical plunge grinding process. This method can cope with process noise as well as modeling bias. The main features of RCB method are its utilization of measurements at the end of each cycle and its use of monotonicity analysis for determining the extremes of bias and noise. This method is investigated in simulation and evaluated by experiment in internal cylindrical plunge grinding operation. The results from simulation and experiment show that it is effective in reducing cycle time in spite of modeling uncertainty in the forms of process noise and modeling bias.

키워드

참고문헌

  1. Trans. ASME v.92 Regressliion Analysis for Predicting Surface Finish and its Application in the Determination of Optimum Machining Conditions A. Bhattachayya;R. Faris-Ginzalez;I. Ham
  2. Control of Manufacturing Processes v.28 stochastic Dynamic Programming Applied to Planning of Robot Grinding Tasks : Part 1-Problem Formulation M. L. Brown;D. E. Whitney
  3. M. S. thesis. Uni. Massachusetts Computer Simulation for Cylindrical Plunge Grinding N. Chiu
  4. Proc. of the 1992 American Controls Conference Intelligent Control of Cylindrical Plunge Grinding G. Xiao;S. Malkin;K. Danai
  5. ASME Journal of Engineering for Industry v.103 Optimization of Multipass Turning With Constraint D. S. Ermer;S. Kromodihardjo
  6. Linear and Nonlinear Programming D. G. Luenberger
  7. Grinding Technology : Theory and Application of Mechining with Abrasives. Chapter 10 : Optimization Adaptive Comtrol and Intelligent Grinding S. Makin
  8. ASME J. of Eng. for Industry v.114 Machining Parameter Optmization for Specified Surface Conitions D. Y. jang;A. Seireg
  9. ASME J. of Eng. for Industry v.100 no.1 Flank Wear Model of Cutting Tools Using Control Theory Y. Koren
  10. CIRP Seminar Mathenatical Model for the Flank Wear While Turning Steel With Carbide Tools Y. Koren;E. Lenz
  11. Manufacturing Technology Review Practical Grinding Optimization S. Malkin
  12. Principles of Optimun design P. Y. Papalambros;D. J. Wilde
  13. Mathematical Programming v.14 Algorithm for Nonlinear Constraints that Use Lagrangian Functions M. J. D. Powell
  14. 4th International Grinding Conference Process Monitoring for Intelligent Controlof Grinding A. Rao;S. Malkin
  15. American Control Conference Cycle Time reduction in Turning under Modeling Uncertainty R. Ivester;K. Danai