대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제21권10호
  • /
  • Pages.1609-1618
  • /
  • 1997
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

형상기억합금을 이용한 지능형 고분자 복합재료의 설계

Design of an Intelligent Polymer-Matrix-Composite Using Shape Memory Alloy

  • 정태헌 (영남대학교 기계공학부) ;
  • ;
  • Jeong, Tae-Heon (Dept.of Mechanical Engineering, Yeungnam University) ;
  • ;
  • 발행 : 1997.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Thermo-mechanical behaviors of polymer matrix composite(PMC) with continuous TiNi fiber are studied using theoretical analysis with 1-D analytical model and numerical analysis with 2-D multi-fiber finite element(FE) model. It is found that both compressive stress in matrix and tensile stress in TiNi fiber are the source of strengthening mechanisms and thermo-mechanical coupling. Thermal expansion of continuous TiNi fiber reinforced PMC has been compared with various mechanical behaviors as a function of fiber volume fraction, degree of pre-strain and modulus ratio between TiNi fiber and polymer matrix. Based on the concept of so-called shape memory composite(SMC) with a permanent shape memory effect, the critical modulus ratio is determined to obtain a smart composite with no or minimum thermal deformation. The critical modulus ratio should be a major factor for design and manufacturing of SMC.

키워드

참고문헌

  1. Metal Matrix Composites:Thermo-mechanical Behavior Taya, M.;Aresenault, R. J.
  2. Ann. Rev. Mater. Sci. v.18 Shape Memory Alloy Tadaki, T.;Otsuka, K.;Shimizu, K.
  3. Ann. Rev. Mater. Sci. Shape Memory Alloy Tadaki, T.;Otsuka, K.
  4. JSME, v.36 no.3 Pseudoelasticity of TiNi Shape Memory Alloy Tobush, H.;Tanaka, K.
  5. Proc. of Mat. Res. Society v.246 Shape Memory Materials and Phenomena Fundamental Aspects and Applications Liu, C. T.;Kunsmann, H.;Otsuka, K.
  6. Materials Trans. Jim v.34 no.3 Enhanced Mechanical Properties of TiNi Shape Memory Fiber/A1 Composites Furuya, Y.;Sasaki, A.;Taya, M.
  7. Materials Trans. Jim v.34 no.3 Strengh of Metal Matrix Composite by Shape Memory Effect Yamada, Y.;Taya, M.
  8. J. of Intelligent Syst. and Struct. v.5 Thermomechanical Response of Shape Memory composites Boyd, J. G.;Lagoudas, D. C.
  9. Smart Mater. Struct. v.1 Active Flexible Rods with Embedded SMA Fibers Lagoudas, D. C.;Tadjbakhsh, I. G.
  10. J. of Engineering Mat. and Tech. v.116 Micromechanics of Active Composites With SMA Fibers Lagoudas, D. C.;Boyd, J. G.
  11. 形狀記憶合金の機械的性質 田中喜久昭
  12. Principles of Composite Mechanics Gibson, R. F.
  13. Engineering Materials Lewis
  14. ANSYS User's Manual for Revision 5.0 Peter Kohnke
  15. Metallurgical Trans. v.2 The Effect of Applied Stress on the Martensitic Transformation in TiNi Wasilewski, R. J.