Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Fracture criterion of mixed mode in adhesively bonded joints of Al/Steel dissimilar materials

Al/Steel 이종재료의 접착이음에 대한 혼합모드의 파괴기준

  • Published : 1997.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

A method of strength evaluation applying fracture mechanics in the adhesively bonded joints of Al/Steel dissimilar materials was investigated in this paper. Various shapes of adhesively bonded Al/Steel scarf joints focussing on fracture criterion of mixed mode crack were prepared for the static tests. Also, stress intensity factors of the interface cracks in adhesively bonded joints of Al/Steel dissimilar materials were analyzed with 2-dimensional elastic program of boundary element method(BEM), and the experiment of fracture toughness were carried out under various mixed mode conditions. From the results, the fracture criterion and method of strength evaluation by the fracture toughness in adhesively bonded joints of Al/Steel dissimilar materials were proposed.

Keywords

References

  1. 대한기계학회논문집 v.16 no.4 접착이음의 강도평가에 관한 연구 (제1보) 정남용
  2. 대한기계학회논문집 v.17 no.4 접착이음의 강도평가에 관한 연구 (제2보) 정남용
  3. 接着繼手の混合ヒ－ド破壤基準, 材科 v.39 no.443 鄭南龍;結城良治;石川晴雄;中野 禪
  4. 日本機械學會論文集(A) v.54 no.506 接着繼手の强度評價ヘの破壤力學の應用 (第1報) 鄭南龍;結城良治;石川晴雄;中野 禪
  5. 한국공작기계기술학회지 v.4 no.4 이종재료의 경사 접착이음에 대하 파괴강도의 예측 정남용
  6. 대한기계학회논문집(A) v.20 no.7 응력특이성계수에 의한 이종 접합재료의 강도평가 정남용;오봉택
  7. 日本機械學會論文集(A) v.56 no.523 應力特異場パテメタを用いた接着繼手の强度評價 腹部敏雄
  8. 日本機械學會論文集(A) v.55 no.512 セテミックス/金屬接合體の强度評價 小林英男;荒居善雄;中村春夫
  9. 日本機械學會論文集(A) v.59 no.557 混合モ－ド界面き裂の破壤試驗とその許價 結城食治;劉金槁;許金泉
  10. Eng. Frac. Mech. v.41 no.5 Stress Based Criterion for an Interface Crack Kinking Out of the Interface in Dissimilar Materials Yuuki, R.;Xu, J. Q.
  11. 한국자동차공학회논문집 v.4 no.3 이종접합재의 계면균열에 대한 진전경로의 예측 정남용;송춘호
  12. 대한기계학회 추계학술대회 논문집(A) Al/Steel 접착이음에 대한 혼합모드의 파괴기준 정남용;장진모
  13. J. Applied Mechanics v.58 Biaxial Loading Experiments for Determining Interfacial Fracture Toughness Liechti, K. M.;Chai, Y. S.
  14. 光彈性實驗法 십二郞;西田正孝;河田行三
  15. 대한기계학회 추계학술대회 논문집(A) 이종재료의 접합이음에 대한 접합잔류응력의 검토 정남용;오봉택;송춘호
  16. Bull. Seiem. Soc. Am. v.49 The Stress Around a Fault or Crack in Dissimilar Media Williams, M. L.
  17. J. Applies Mechanics v.32 Stress Distribution in Bonded Dissimilar Materials with Cracks Erdogan, F.
  18. Trans. ASME. J. of Applied Mechanics v.32 A Crack Between Dissimilar Media England, A. E.
  19. Trans. ASME, J. of Applied Mechanics v.55 Elastic Fracture Mechanics Concepts for Fnterfacial Cracks Rice, J. R.
  20. Trans. ASME, J. of Applied Mechanics v.32 Plane Problems of Cracks in Dissimilar Media Rice, J. R.;Sih, G. C.
  21. Trans. ASME, J. of Applied Mechanics v.55 Elastic-plastic Analysis of Cracks on Bimaterial Interfaces; Part 1 Shih, C. F.;Asaro, R. J.
  22. Trans. ASME. J. of Applied Mechanics v.46 The Interface Crack in a Combined Tension-compression and Sheer Field Comninou, M.
  23. Int. J. of Fracture Mechanics v.18 The Interface Crack with a Contact Zone Atkinson, C.
  24. Trans. ASME, J. of Applied Mechanics v.47 A Non-slip Interface Crack Mak, A. F.(et al)
  25. Eng. Fracture Mechanics v.28 On Strain Energy Release Rates For Interfacial Cracks in Bimaterial Media Sun, C. T.;Jih, C. J.
  26. 日本機械學會論文集(A) v.55 no.510 異材界面き裂の應力擴大係數の境界要素彈性解析 結性良治;曺相風