Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)
- Volume 21 Issue 3
- /
- Pages.385-392
- /
- 1997
- /
- 1226-4873(pISSN)
- /
- 2288-5226(eISSN)
DOI QR Code
A Study on the Strength and Failure Mode of Co-cured Composite Joints
동시경화법으로 제조된 복합재료 조인트의 강도 및 파괴모드 연구
- Choi, Jin-Ho (Gyeongsang National University) ;
- Lee, Dae-Gil (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
- Published : 1997.01.01
Abstract
The joint design and manufacture of the composite structure have become an important research area because the structural efficiency of the composite structure is often determined by its joint not by its basic structure. The co-cured joint is an efficient joint technique because both curing and jointing for composite structures are achieved simultaneously. In this paper, the torque capacities of the co-cured tubular lap joint with and without knurling of the pyamid type were experimentally measure. From the experimental resuts, it was found that the excess resin played a role as an adhesive in the co-cured tubular lap joint whose steel adherends were not knurled. Also, it was found that the torque capacity of the co-cured joint was increased as the knurling size of the pyramid type on the surface of the steel adherend was increased.