참고문헌
- Computer & Structures v.3 A numerical thermo-mechanical model for the welding and subsequent loading of a fabricated structure Hibbitt, H.D.;Marcal, P.V.
- Journal of pressure vessel technology, Trans. of ASME v.97 no.3 Thermomechanical analysis of the welding process using the finite element method Friedman, E.
- ABAQUS user's manual(version 5.5)
- 대한용접학회지 v.11-3 용접잔류응력 해석을 위한 Heat Input Model 개발 심용래;이성근
- Computer & Structures v.32 no.2 Predicting residual stress in multipass weldments with the finite element method Free, J.A.;Porter Goff, R.F.D
- Welding Journal v.71 no.9 Determination of Residual Stresses in Thick Section Weldments Shim Y.L.(et al.)
- M.S. Thesis, The Ohio State University Development of a PC-based FEM model to predict weld distortion Penso, J.A.
- Intech R&D, Project report to General Motors Determination of welding induced shrinkage strains for distortion prediction of welded frame structures Tsai, C.L.;Shim, Y.L.
- Journal of Applied Mechanics v.35 A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks Rice, J.R.
- International Journal of Fracture v.15 no.4 The Use of the J-integral in Thermal Stress Crack Problems Wilson, W. K.;Yu, I.
- International Journal of Fracture v.13 no.2 An Integral Associated with the State of a Crack Tip in a Non-elastic Material Blackburn, W.S.;Jackson, A.D.;Hellen, T.K.
- Engineering Fracture Mechanics v.13 On the Path Independent Integral -J Kishimoto, K.;Aoki, S.;Sakata, M.
- Engineering Fracture Mechanics v.16 no.3 Elastic-Plastic Analysis of Cracks in Thermally Loaded Structures Aoki, S.;Kishimoto, K.;Sakata, M.
- International Journal of Fracture v.30 Energy Release Rate along a Three-dimensional Crack Front in a Thermally Stressed Body Shih, C.F.;Moran, B.;Nakamura, T.