Abstract
In designing short to medium-span bridges, continuous composite bridges are becoming popular due to their advantages. However, if the concrete slab in continuous composite bridge is not prestressed, negative moment occurs in the mid-support and creates problems such as cracks in the concrete slab. Therefore. it must be considered in design. Two methods of arrangement of shear connectors were conducted using finite element elastic plastic analysis. Partial interaction theory was introduced and an analytical solution based on this theory was derived. The differences in the degree of interaction were investigated using analytical solutions and finite element analyses of simple composite beam and continuous composite beams. The results of the analyses were used to determine the advantage and disadvantages as well as any precaution when necessary using partial composite during actual design and construction.
중. 소규모의 교량 설계시, 그가 가지고 있는 여러 가지 장점 때문에 연속 합성형 교량 형식을 채택하는 것이 점차 보편화되고 있는 실정이다. 그러나 콘크리트 슬래브에 프리스트레스를 가하지 않는 경우에는 교량 중앙 지점부의 부모맨트로 인하여 발생하는 콘크리트 슬래브의 균열을 설계시에 고려해야 한다. 이 논문에서는 기존에 제시된 두 가지 전단연결재 설계 방법에 대하여 탄.소성 유한요소해석법으로 비교 검토하였다. 그리고 부분합성이론을 소개하고 이 이론에 의한 이론적 엄밀해를 유도하였다. 합성정도에 따른 단순합성보와 연속합성보의 거동을 해석결과와 실험결과의 비교 분석을 통하여 부분합성이론을 강합성형교의 설계와 시공에 적용할 경우의 장단점을 검토하였다.