Abstract
Photosensitive compound, 1-methyl-4-[2-(4-diethylacetylphenyl)ethenyl] pridinium methosulfate(SbQ-A salt), was synthesized from dimethyl sulfate, terephthalaldehyde mono-(diethylacetal) and 4-picoline. SbQ-A salts were reacted with poly(vinyl alcohol)s, (PVA) in aqueous solution with phosphoric acid as catalyst to give photosensitive PVA-SbQ with different SbQ content and molecular weight. Relative photosensitivity of PVA-SbQ was determined by gray scale(GS) method. The rotative sensitivity of PVA-SbQ increased with increasing amount of bound SbQ in the case of high molecular weight(MW=77,000-79,000g/mol) as substrate and decreased with decreasing molecular weight of PVA with about constant(1.3mol%) amount of bound SbQ. The most sensitive polymer was obtained when SbQ group content in PVA-SbQ reached about 2.63mol% in the case of high molecular weight(77,000-79,000g/mol) PVA. This sample showed 90 times greater sensitivity than dichromated PVA as reference photosensitive system. PVA-SbQ photosensitive polymer synthesized was applied to the photolithographic screening process of phosphor on the panel of cathode ray tube(CRT). Phosphor slurry was made with PVA-SbQ, phosphor, a small amount of surfactant and other additives using water as medium. The slurry was coated onto panel, dried by heater, exposed to UV light and then developed by distilled water. When a small amount of cationic surfactant such as cetyltrimethylammonium chloride was used in the slurry formulation, the sharpness of phosphor pattern was equal to or better than that of dichromated PVA photosensitive polymer system used currently.
광 이량화 특성을 나타내는 1-methyl-4-[2-(4-diethylacetylphenyl)ethenyl] pridinium methosulfate(SbQ-A염)를 dimethyl sulfate, terephthalaldehyde mono-(diethyl acetal) 및 4-picoline을 이용하여 합성하였다. 합성된 SbQ-A염을 PVA와 반응시켜 동일(MW=77,000-79,000g/mol) 분자량을 가진 PVA내 SbQ의 함량이 다른 PVA-SbQ-H 시료 및 SbQ의 함량은 약 1.3mol%로 같으나 PVA의 분자량이 다른 PVA-SbQ-L들을 합성하였다. Gray scale(GS)법을 이용하여 측정된 PVA-SbQ 수용성 감광성 고분자의 상대감도는 PVA내 SbQ의 함량이 증가함에 따라 증가하였으며, PVA의 분자량이 낮아질수록 감소하였다. PVA-SbQ-H의 경우 SbQ 함량이 2.63mol%인 시료는 PVA에 ammonium dichromate가 혼합된 기존시료보다 90배 증가된 감도를 나타내었다. PVA-SbQ를 사용하여 형광체 슬러리를 제조하고 사진식각공정을 거쳐 형광체의 미세패턴을 형성하였다. 형광체 슬러리 제조시 양이온 계면활성제인 cetyltrimethyl ammonium chloride를 첨가제로 사용하면 형광면의 해상도가 증가됨을 알았다.
